V5.2.7 VVDI PROG is released, get the free download link from Xhorsevvdi.

1. Free Download V5.2.7 VVDI PROG Software

WE Link

Mega Link

2.V5.2.7 VVDI Prog Update (2023-4-1

*ThisversionDON'tneedupdate firmware
+AddMB91F53BCoptionin <2-MCU>-><FYJITSU-MB9XF>
+AddXC2361E-136optionin <2-MCU>-><INFINEON-XC2XXXX>
+AddSPC5602Doptionin <2-MCU>-><ST-SPC560XXXX>
+AddMQB-LOCK(D70F35xx)-READ, MQB-LOCK(D70F35xx)-WRITE, VW-4th-NEC35XX-READ, VW-4th-NEC35XX-WRITE, optionsin <5-DASHBOARD>-><VOLKSWAGEN>

https://www.xhorsevvdi.com/

Posted by: xhorsevvdi at 03:42 AM | No Comments | Add Comment
Post contains 51 words, total size 2 kb.

The latest V7.3.2 VVDI2 Software is released! Get the free download link from Xhorsevvdi.

1. Free Download VVDI2 V7.3.2 Software

V7.3.2 Software

2. V7.3.2 VVDI2 Update Info:

!!!Thisversionrequires firmwareV7.3.0!!!

=====VAGV7.3.2=====
1.SupportImmo4-NEC35xxdashboardwhichnotsupportOBD(AllkeylostandnewVDO)-requireMQB48-NEC35xx(Lock)license
2.AddkeylearnforBrazilNEC+95320(Marelli)(Menu->Keylearn->Keylearn->VWNEC95320(Marelli)Brazil)
3.ImprovementforNEC+24C64:SupportmoretypeinBrazil
4.ImprovementforOBDreadBCM2immo data
5.Bugfix
=====BMWV7.3.2=====
1.SupportunlockmoreBDCversionsdirectlywithoutprogramtootherversion
2.Bugfix
=====PorscheV7.3.2=====
1.Bugfix
=====PSAV7.3.2=====
1.Bugfix
=====TransponderProgrammerV7.3.2=====
1.Bugfix
=====Copy48(96bits)V7.3.2=====
1.Bugfix
=====J2534V7.3.2=====
1.Bugfix
=====OnlineUpateToolV7.3.2=====
1.Bugfix
=====QuickStartV7.3.2=====
1.Bugfix

https://www.xhorsevvdi.com/

Posted by: xhorsevvdi at 03:42 AM | No Comments | Add Comment
Post contains 62 words, total size 2 kb.

Two customers gave feedback that new firmware of Xhorse Condor II identifies reversed bitting.

Feedbacks:

1.Condor II last update HONDA side A and B reversed... 3 cutters and 3 trucks.

2.The key is correct but search for code is incorrect. But when you flip the number it has a key code

*Now the issue is fixed! Please update both firmware and database to the latest version.

Firmware: V1.07, Database: V23

Posted by: xhorsevvdi at 03:42 AM | No Comments | Add Comment
Post contains 80 words, total size 3 kb.

One customer gave feedback that the screen of his Xhorse XP005L won't turn on.

Here is the

Solution:

Take machine part and check if cables are loose.

For how to disassemble machine, please check:

How to Replace Xhorse Dolphin XP005L Key Cutting Machine Screen?

Posted by: xhorsevvdi at 03:41 AM | No Comments | Add Comment
Post contains 52 words, total size 1 kb.

This article is going to share with you how to mount Xhorse Key Cutting Machine in your van.

Van:

Nissan NV 1500

Machines:

Dolphin XP007 Manual Machine

Dolphin XP005L Auto Machine

How to Mount Machine in Van?

The XP007 Duplicator doesn't need to be on Internet ever so just screwed this directly onto vam

The Dolphin II does need the Internet and Wi-Fi works in driveway and hotspot works but it doesn't always like it on updates.

What I did is mounting it to a board and countersunk it on the bottom and there screws go through the board. I can take these off without tools if I need to drag it in the house to do an update.

Just have four corner, held down and can't move anything.

Got a power strip behind it and the power supply, and have switches on the chargers. Set Old Dolphin in the same way for a couple of years.

Done! Simple and Nice!

Posted by: xhorsevvdi at 03:40 AM | No Comments | Add Comment
Post contains 172 words, total size 3 kb.

One customer asked us to find the correct remote control for Toyota smart remote 271451-6340 in his Key Tool Max Pro.

Here are Result of

Reading Chip

and Frequency.

Remote Control:

PCB number 5290, XM28/ XM38 Toyota Remote is required.

After remote generation, change frequency to that same as original remote.

(Path: Special Function>>VVDI remote function>>Toyota smart key setting)

Posted by: xhorsevvdi at 03:40 AM | No Comments | Add Comment
Post contains 68 words, total size 2 kb.

What is the easiest way to add a spare for 2023 Toyota Camry? Here we will show you how to do it using Xhorse Universal Remote within 5 minutes.

*This vehicle has regular keys, so key code is not required

Simple Guide:

Generate Remote>>Program Remote>>Clone Transponder

Tools:

VVDI Key Tool Plus

VVDI Super Chip XT27A

XKTO10EN Wire Remote

Process:

Step 1. Generate Remote

Original Key FCC ID.

Generate wire remote. (HYQ12BFB HYQ12BGF, 314FSK)

Step 2. Program Remote

Go to

Immo Programming>>Toyota>>Select from model>>Camry>>2010->>Remote program (2013-)>>Remote adding

Switch on ignition and open driver's door at the same time.

Click lock&unlock button for 4 seconds, and then lock button for 1 second.

Step 3. Clone Transponder

Read origianl key.

Insert VVDI XT27 Chip as required.

Done! Simple and nice!

Posted by: xhorsevvdi at 03:39 AM | No Comments | Add Comment
Post contains 138 words, total size 3 kb.

One customer gave feedback of cutting key for phaeton hu66 that by his Dolphin XP005L new key looked identical but did not fit for the lock. The question is blade not going until the end into ignition.

Here is the

Reason:

Tip part of the left track is different from the original.

Solution:

1.Use 2.5mm cutter instead of 1.5mm one

2.Fix it with a manual machine

Tips:

1.Select correct key blade (the blade is likely thicker, in width file it down)

2.Cut with manual machine, or with automatic machine select universal duplicate or 9 cut

3.Both 1.5mm and 2.5mm should work

4.Cut it deeper, on Xhorse Dolphin use 140 depth

Posted by: xhorsevvdi at 03:39 AM | No Comments | Add Comment
Post contains 119 words, total size 2 kb.

One customer gave feedback of cutting key for phaeton hu66 that by his Dolphin XP005L new key looked identical but did not fit for the lock. The question is blade not going until the end into ignition.

Here is the

Reason:

Tip part of the left track is different from the original.

Solution:

1.Use 2.5mm cutter instead of 1.5mm one

2.Fix it with a manual machine

Tips:

1.Select correct key blade (the blade is likely thicker, in width file it down)

2.Cut with manual machine, or with automatic machine select universal duplicate or 9 cut

3.Both 1.5mm and 2.5mm should work

4.Cut it deeper, on Xhorse Dolphin use 140 depth

Posted by: xhorsevvdi at 09:39 AM | No Comments | Add Comment
Post contains 119 words, total size 2 kb.

Xhorse 35160DW Chip could perfectly replace original chips including M35080, M35080-3, M35080-6, M35080V6, M35080VP, D80D0WQ, 160D0WQ,35160WT. In this article, we will show you how to write 35160WT dump into Xhorse chip.

Tools:

Xhorse 35160DW Chip

VVDI Key Tool Plus

Process:

Put 35160DW Chip into EEPROM adapter.

Go to

Prog>>M35160(adapter)

Select

Read>>All

Backup data first.

Select

Write>>All

Write M35160WT data.

Backup and check new data.

Then we just need to solder it to PCB.

Done! That's how to use VVDI 35160DW Chip.

Posted by: xhorsevvdi at 09:38 AM | No Comments | Add Comment
Post contains 93 words, total size 3 kb.

In this article, we are going to bring you a review of MQB48 digital cluster key adding by VVDI Key Tool Plus with Xhorse MQB License.

Turn on VVDI Tablet,

Go to

Immo programming>>VW>>Select by type>>MQB instrument immo system>>Instrument-MQB48(VDO/JCI-NEC35xx lock)

Connect device to dashboard by lifting pin.

Read and save data.

Select "Obtaining immo data".

Load data to get immo file.

Install dashboard back.

Connect device to vehicle.

Select

Generate dealer key-Load immo data>>Prepare normal dealer key>>Add key - You should have a working key

Insert working key to get sync data.

Insert new key to make dealer key.

Select "Learn key".

Load immo data, and put new keys close to sensing area one by one for learning.

Key learn successfully.

Done!

Posted by: xhorsevvdi at 09:38 AM | No Comments | Add Comment
Post contains 135 words, total size 3 kb.

Xhorse VVDI2 is a professional tool on key programming for high-end makes including VW, BMW, Porsche... it works perfectly chip programmer VVDI PROG.

Here we will show you how to program Porsche Cayenne 2013 when all key lost using VVDI PROG + VVDI2.

Take out BCM from vehicle and start it.

EEPROM:

2M25J

Step 1. Read D-Flash

Run VVDI PROG software,

Diagram. (desoldering and wire cutting are required)

Connect by diagrams.

Read and save D-Flash data.

Step 2. Make Dealer Key

Run VVDI2 software,

Go to

Key Learn>>New Porsche Key>>Prepare Dealer Key>>EEPROM (2M25J)

Load D-Flash data.

Insert new key and click "prepare dealer key".

Success and save new file.

Load new file.

Insert another new key and add.

Save the latest dump file.

Step 3. Key Learn

Go to

Key Learn>>New Porsche Key>>Learn

Load original dump file.

Insert new keys one by one to learn.

Done!

That's how VVDI2 do AKL programming for Porsche Cayenne 2012.

Posted by: xhorsevvdi at 09:37 AM | No Comments | Add Comment
Post contains 165 words, total size 3 kb.

Question:

M5 Clamp won't work with my Condor XC-Mini. I update it to the latest version, but now I can't calibrate the machine at all, with M1 M2 M5... it could work with M1 M2 clamp before update.

Here is the

Solution:

1.Update firmware again by Upgrade Kit

2.Lower probe and cutter by about 2mm and calibrate machine again

Posted by: xhorsevvdi at 09:37 AM | No Comments | Add Comment
Post contains 72 words, total size 2 kb.

This article is going to show you all optional accessories of Xhorse Condor XC-Mini Plus II Machine.

Check the List:

Optional Accessories	Image	Function
Clamp M4		Household Key Cutting
0.5mm Probe		Snake Probe Groove Key and Certain Dimple Key Learning
1.0mm Pointed Probe		Dimple Key Learning
2.5mm Engraving Cutter		Key Blanks Engraving
3.5mm Dimple Cutter (internal)		Dimple Key Cutting (internal circle)
4.5mm Dimple Cutter (internal)		Dimple Key Cutting (internal circle)
6.0mm Dimple Cutter (external)		Dimple Key Cutting (external circle)
6.5mm Dimple Cutter (external)		Dimple Key Cutting (external circle)

Posted by: xhorsevvdi at 09:36 AM | No Comments | Add Comment
Post contains 97 words, total size 4 kb.

One customer asked if it is impossible to update only Xhorse Key Reader. The app said " it is for the Dolphin device only" when he tried to update it.

Here Xhorsevvdi tech

Answer:

Enter any blade options, switch to expert mode, and update Key Reader firmware via Wi-Fi. (Do not forget to turn on Wi-Fi connection)

Posted by: xhorsevvdi at 09:36 AM | No Comments | Add Comment
Post contains 64 words, total size 1 kb.