In this article, we are going to show you how to Read/ Write a Valeo BSI 2004 P07 module using Xhorse VVDI PROG.

MCU : HC9S21DP512 (UNSECURED)

EEPROM : 95128

1.MCU

Connect device to MCU via soldering.

Read EEPROM.

Read FLASH.

2.EEPROM

Desolder chip and connect it to device.

Read EEPROM.

Load EEPROM file to Abrites to get PIN code.

Done!

Posted by: xhorsevvdi at 06:43 AM | No Comments | Add Comment
Post contains 72 words, total size 3 kb.

One Dolphin XP005L user gave feedback that he broke XP005L Clamp Handle on the clamp mount. He wondered how to replace this part.

Here is how to replace it?

1)Pull out clamp mount

2)Remove two screws on the bottom

3)Swap the handle part

Posted by: xhorsevvdi at 06:42 AM | No Comments | Add Comment
Post contains 53 words, total size 2 kb.

One customer gave feedback that his VVDI Tablet showed "Hardware Error" when generating Toyota Prado using XM38 Remote.

Here is the Solution:

1)Clear cache

2)Re-download database

Posted by: xhorsevvdi at 06:42 AM | No Comments | Add Comment
Post contains 37 words, total size 1 kb.

Xhorse added unlocking BMW BDC system via OBDII to VVDI2/ Key Tool Plus/ BIMTool.

Here we've collected some reviews of this function, Let's check it out.

Tools:

V7.3.5 VVDI2 (VB-01 BMW OBD and VB-03 FEM/BDC Function are activated)

V1.9.0 BIMtool

Key Tool Plus with V528 Database

1.VVDI2

1)BMW X5 F015 MY 2016 BDC Unlock Success by OBD

2)BMW X1 2019 BDC SWFL unlock success via OBD and key programmed fast and easy.

2.BIMTool

1) VVDI BMW Unlock BDC module via OBDII. Easy and fast Xhorse

3.Key Tool Plus Pad

1) Programming key BMW F15 2015.

All ok with OBD only 2 min.

http://blog.xhorsevvdi.com/xhorse-unlock-bmw-bdc-via-obdii-function-review/

Posted by: xhorsevvdi at 06:41 AM | No Comments | Add Comment
Post contains 111 words, total size 3 kb.

V1.9.0 BMW Tool add unlocking BDC via OBD! No need to remove BDC module.

Here we will show you how to unlock BDC.

Process:

Run BIM Tool software.

Get key info.

Select "Programming FEM/BDC system".

Select "Yes" to unlock via OBD and ensure Internet connection.

Record module info before coding.

Start unlocking BDC module.

Successfully unlock.

Select key 6.

Select "Prepare dealer key with ignition switch".

Input ISN.

Record key info.

Insert new key into ignition coil.

Key learn okay.

Posted by: xhorsevvdi at 06:41 AM | No Comments | Add Comment
Post contains 91 words, total size 3 kb.

VVDI Key Tool Plus VA Version is designed for autosmiths who won't program many Mercedes/ BMW cars, but VA version could do more than VAG functions.

Here we will show you the difference between VA version and Full version.

Key Tool Plus VA Version vs. Key Tool Plus Full Version

Posted by: xhorsevvdi at 06:40 AM | No Comments | Add Comment
Post contains 167 words, total size 3 kb.

V7.3.5 VVDI2 adds BDC unlocking via OBDII function.

Here comes a VVDI2 review:

BMW X5 F015 MY 2016 BDC Unlock Success by OBD

Take a look at how it is done:

Prompt if programming BDC via OBD or on Bench.

Read key info.

Unlocking BDC.

BDC update successfully.

Add one key in the fifth blank.

Erase key 1.

Done!

Posted by: xhorsevvdi at 06:40 AM | No Comments | Add Comment
Post contains 70 words, total size 3 kb.

One customer asked if he could take Condor Mini Plus II Machine outside for jobs.

1. is a 120v ac power outlet enough to run the condor mini plus II ?

Yes, Input Voltage 90~264V

2. Condor Plus ii doesn't have a built-in battery like a Xhorse Dolphin one. It might not work in my car because the of the 200 w power draw

The Answer is Yes.

Power Condor II using a car battery via a power adapter.

Connection:

Car battery>>power adapter>>Condor Machine

*Condor II working voltage: 90~264V, and please note that plus ii is 200W

If still not know how to choose dolphin ii and condor plus ii key cutting machine, you can also check this blog

Posted by: xhorsevvdi at 06:39 AM | No Comments | Add Comment
Post contains 130 words, total size 2 kb.

V7.3.5 VVDI2 adds BDC unlocking via OBDII function.

Here is a review:

BMW X1 2019 BDC SWFL unlock success via OBD with VVDI2 and key programmed fast and easy.

Directly unlock BDC via OBD, VVDI PROG for reading EERPOM on bench is not required.

Ensure good network connection during BDC unlocking.

Note:

SWFL_00002419.085.xxx.xxx is not yet supported unlocking via OBD.

Read Also:

http://blog.xhorsevvdi.com/how-is-xhorse-vvdi2-for-bmw-fem-bdc-akl-programming/

Posted by: xhorsevvdi at 09:08 AM | No Comments | Add Comment
Post contains 73 words, total size 2 kb.

One customer asked the difference between these two clone functions on his VVDI Key Tool Max: HCS/Fixed Code Clone and Special Clone.

Here are the Differences:

1)HCS/Fixed Code Clone

Normal/ Fix code always maintains same rf and pulse.

Only supports a few very old vehicles.

2)Special Clone

Rolling code changes as you go using the controller.

Key clone will void original key.

Wire Remote is required.

Posted by: xhorsevvdi at 09:07 AM | No Comments | Add Comment
Post contains 78 words, total size 1 kb.

Question:

VVDI MB Tool can't communicate with 220 EIS , I can't solve this problem am stuck with this it's been months when I try to read the EIS data it responds "can communicate with EIS" and when I try to read w220 EIS using IR adapter it can't reach 100 percent it fails on 90%.

Here is the Answer:

For All Key Lost, it's required to remove EIS and read it on bench using VVDI MB.

More EIS Diagrams:

http://blog.xhorsevvdi.com/vvdi-mb-tool-eis-elv-ecu-connection-diagram/

Posted by: xhorsevvdi at 09:06 AM | No Comments | Add Comment
Post contains 93 words, total size 2 kb.

Question:

Xhorse XSTO20EN, the Right Sliding Door Button doesn’t work. It’s not programmed. The Button has no frequency on Key Tool Max Pro. Came broken. The rest of buttons tested fine.

Here Xhorsevvdi tech answers:

1)If remote is generated, modify button value (01 02 04 08 10 20 40 80...)

Path: Special function>>vvdi remote function>>Smart key customization

2)If remote is not generated, its normal, as one button won't work when this 5-button remote is generated into a 4-button remote

http://blog.xhorsevvdi.com/solved-xhorse-xsto20en-toyota-xm38-remote-wont-work/

Posted by: xhorsevvdi at 09:05 AM | No Comments | Add Comment
Post contains 88 words, total size 2 kb.

One customer asked if VVDI2 could do BMW M3 2018 F-series when all key lost.

Here Xhorsevvdi tech answers:

Yes it could do it, and process depends on immobilizer system.

If the system is

1)BDC

This would be an OBD job.

Tools:

V7.3.5 VVDI2 (VB-03 FEM/BDC Function is activated)

V1.9.0 BIMtool

Key Tool Plus with V528 Database

2)CAS4/ FEM/ BDC 085 version

This would be a bench job.

Posted by: xhorsevvdi at 09:05 AM | No Comments | Add Comment
Post contains 78 words, total size 2 kb.

V5.3.0 VVDI Prog software is released now, get free download link V5.3.0 VVDI Prog software from XhorseVVDI.com.

1.Free Download V5.3.0 VVDI Prog Software

V5.3.0 VVDI PROG

Password:123456

2.V5.3.0 VVDI Prog Update Info
*ThisversionDon'tneedupdate firmware
*ModifyGL8BCM(2017--)-WRITE, optionin<4-IMMOBILIZER>-><BUICK>:Optimizetheprocess
+AddFENGSHENS30(93C46A)optionin<8-OTHER>-><Dongfeng>

Posted by: xhorsevvdi at 09:04 AM | No Comments | Add Comment
Post contains 49 words, total size 2 kb.

This article is about simple tests on new Xhorse FT-OBD MINI OBD Tool on bench.

1.Unboxing

The user manual.

The white tool with a USB connector, one button.

2.Binding

Turn on Key Tool Max, and switch to FT-OBD page.

Connect it to FT-OBD Tool.

Select

Device Information>>Combine Device

Bind device to account by the code.

3.Function Menu

Immo system.

Smart key before 2016.

8A - P4 88.

Smart key after 2016.

8A - P4 A8/A9/AA.

Directly use XM38 Remote, no emulators needed.

Remote system for Toyota/ Lexus.

http://blog.xhorsevvdi.com/xhorse-ft-obd-tool-unboxing-binding-and-first-impression/

Posted by: xhorsevvdi at 09:04 AM | No Comments | Add Comment
Post contains 96 words, total size 4 kb.

On a customer's feedback, his Xhorse Condor 2 Machine won't respond on the screen. He could not select language and use this machine.

Here Xhorsevvdi tech shares

Solution:

Open screen and check cables.

1)Remove the six screws

2)Open cover and make sure the two cables are connected well.

Posted by: xhorsevvdi at 09:03 AM | No Comments | Add Comment
Post contains 59 words, total size 2 kb.

In this article, we are going to show you how to program Toyota Bezza AKL with the new Xhorse FT-OBD Tool.

Let's take a look:

Turn on Key Tool Max. (we could also use VVDI MINI)

Go to

Select from model>>bezza>>Smart key system

Select "Immobilizer system ECU initialization".

Select "Register new key".

Put new key close to ignition to register key.

Register another one.

Done! Simple and nice.

Posted by: xhorsevvdi at 09:02 AM | No Comments | Add Comment
Post contains 77 words, total size 3 kb.