How to Decode and Cut Renault Laguna3 Key Blade?

Question:

I can crochet the lock of Renault Laguna3 but impossible to make a proper reading to cut.

6 drill blades and still no correct combination

I don't understand when they say you have to read it backwards.

1.Lock - How to Disassemble Lock?

 

 

2.Decode - What does Backwards/ Reverse mean when reading with laguna3 lishi?

When you decode the lock and have your reading say 123443 reverse the values in positions 3 and 6 , so enter cuts in machine of 122442 and key will work.

 

3.Cut - Feedback:

Finally managed to cut a key correctly.

Decode everything at the top and take in Xhorse XP005L size by code, va2eh2 sheet ID1923, on raise the blade with a small hold like piece of credit card and it goes quiet.

This hold is also used for the XP005L with M5 Mounts.

http://blog.xhorsevvdi.com/how-to-decode-and-cut-renault-laguna3-key-blade/

Posted by: xhorsevvdi at 09:07 AM | No Comments | Add Comment
Post contains 151 words, total size 2 kb.

Xhorse MQB48 License Read Audi A3 Year 2016 Immo Success

Xhorse MQB48 License is designed for decrypting MQB48 system immobilizer data.

Here is a review:

Read successfully Audi A3 year 2016.

 

Simply check the procedure:

The dashboard (only NEC35XX chips are supported).

Chip type is D70F3526.

Connect by diagrams, one 1k resistor is required.

Read cluster data by VVDI PROG successfully.

Load data into VVDI2 software.

Got IMMO data.

If we need to correct odometer, check functions here, MQB48 License supports it.

http://blog.xhorsevvdi.com/xhorse-mqb48-license-read-audi-a3-year-2016-immo-success/

Posted by: xhorsevvdi at 10:10 AM | No Comments | Add Comment
Post contains 83 words, total size 4 kb.

Fixed! Xhorse Generate Toyota Page A8 Fine but Page A9 Fail

One customer gave feedback that by his Key Tool Max page A8 is generated fine and always, but page A9 is not generated at all. What is the problem?

Here is the

Reason:

The used key in picture is XM28 Toyota remote, which does not support 0410, 0010 (A9, AA).

Solution:

Use a newer XM38 Toyota Remote.

 

http://blog.xhorsevvdi.com/fixed-xhorse-generate-toyota-page-a8-fine-but-page-a9-fail/

Posted by: xhorsevvdi at 10:09 AM | No Comments | Add Comment
Post contains 69 words, total size 2 kb.

Why VVDI Key Tool Max Pro Generate Remote No Points?

One customer gave feedback that he did not get any points after generating 5 Xhorse Remotes using Key Tool Max Pro.

Besides, he had generated 5 Xhorse Smart Remote ok.

Here is the Answer:

1.Click "More" to collect points

2.Identify Remote

Check if other 5 remotes are Wire Keys, because there is a server issue about points of wire key, and points will be returned this week.

Path: Special function>>VVDI remote function>>Detect remote

http://blog.xhorsevvdi.com/why-vvdi-key-tool-max-pro-generate-remote-no-points/

Posted by: xhorsevvdi at 10:09 AM | No Comments | Add Comment
Post contains 84 words, total size 2 kb.

Free Download V5.2.5 VVDI PROG VW MQB48 Dashboard

V5.2.5 VVDI PROG is released, get the free download link from Xhorsevvdi.

1. Free Download V5.2.5 VVDI PROG Software

WeTransfer Link

Mega Link

2.V5.2.5 VVDI Prog Update (2023-3-16)

*ThisversionDON'tneedupdatefirmware
+AddPIC24HJ64GP202,
PIC24HJ64GP204,
PIC24HJ64GP206,
PIC24HJ64GP206A,
PIC24HJ64GP210,
PIC24HJ64GP210A,
PIC24HJ64GP310,
PIC24HJ64GP310A,
PIC24HJ64GP502,
PIC24HJ64GP504,
PIC24HJ64GP506,
PIC24HJ64GP506A
optionsin
<2-MCU>-><MICROCHIP-PIC24HJ>
+AddJaguarBCM(MC9S12XET256)
optionin
<4-IMMOBILIZER>-><Jaguar>
+AddLandroverBCM(MC9S12XET256)
optionin
<4-IMMOBILIZER>-><LandRover>
+AddMQB-LOCK(D70F35xx)
optionin
<5-DASHBOARD>-><VOLKSWAGEN>
+AddREADVVDIPROGSN
optionin
<8-OTHER>-><VVDI>

https://www.xhorsevvdi.com/

Posted by: xhorsevvdi at 10:08 AM | No Comments | Add Comment
Post contains 64 words, total size 2 kb.

Free Download V7.3.1 VVDI2 Software VW MQB48 Update

The latest V7.3.1 VVDI2 Software is released! Get the free download link from Xhorsevvdi.

1. Free Download VVDI2 V7.3.1 Software

V7.3.1 Software

2. V7.3.1 VVDI2 Update Info:

!!!Thisversionrequires firmwareV7.3.0!!!

===== VAG V7.3.1 =====

1.Support MQB48-NEC35xx(Lock) type-Contact dealer for license

1).Support all MQB48 with NEC35xx chip-Require read encrypt data with VVDIPROG

2).Support decode immo data, key learn, fix KM, update immo data etc.

3).Support VDO type, JCI type, and all key lost situation(require synchronize data)

1.Improvement auto detect for VAG immobilizer system

2.Bugfix

===== BMW V7.3.1 =====

1.Bugfix

===== Porsche V7.3.1 =====

1.Bugfix

===== PSA V7.3.1 =====

1.Bugfix

===== Transponder Programmer V7.3.1 =====

1.Improvement prepare remote function

2.Immobilizer data tool: Asia->Jiao->Xinglang->95080 add new type

3.Immobilizer data tool: Euro->Benz->Car-ML EAM Bugfix

4.Immobilizer data tool: Euro->Benz->Car-ML AAM Bugfix

5.Bugfix

===== Copy 48 (96 bits) V7.3.1 =====

1.Bugfix

===== J2534 V7.3.1 =====

1.Bugfix

===== Online Upate Tool V7.3.1 =====

1.Bugfix

===== Quick Start V7.3.1 =====

1.Bugfix

http://blog.xhorsevvdi.com/free-download-v7-3-1-vvdi2-software-vw-mqb48-update/

Posted by: xhorsevvdi at 10:08 AM | No Comments | Add Comment
Post contains 161 words, total size 2 kb.

Xhorse Key Tool Plus Range Rover 2020 Replace RFA Add Key OK

To program Range Rover 2018+ using Xhorse Key Tool Plus, we need to replace RFA module/ CPU, and then device will rewrite data and program new keys. Here we share a review of 2020 Range Rover Add Smart Key.

After Replacing RFA chip, connect Xhorse Tablet to vehicle.

Go to

Immo programming>>Land Rove>>Land Rover (2018-)>>Smart key system

Read vehicle info.

Select "Replace RFA(Beta)".

Press unlock button to add two keys.

Done!

http://blog.xhorsevvdi.com/xhorse-key-tool-plus-range-rover-2020-replace-rfa-add-key-ok/

Read Also:

Xhorse Key Tool Plus Possible to Program 2019 Range Rover AKL?

Posted by: xhorsevvdi at 10:07 AM | No Comments | Add Comment
Post contains 97 words, total size 3 kb.

VVDI PROG Read MQB48 Dashboard by Cut Pin Tips

Xhorse VVDI PROG/ Mini Prog gets Lift Pin or Cut Pin to read MQB48 dashboard chip data. Compared to Lift Pin, Cut Pin is safer, but there are still some tips.

Actually, Cut Pin is adopted in BMW CAS or Porsche BCM before. It could make wires short-circuit and break CAS, or relay may sound because of incorrect wire restoration.

 

Here are some tips:

1.Cutting Range

For some types, we cut only one wire, while for other dashboards we may need to cut one small area.

2.Short-circuit

When we restore cut wires, watch nearby wires, and Do Not make them short-circuit.

http://blog.xhorsevvdi.com/vvdi-prog-read-mqb48-dashboard-by-cut-pin-tips/

Posted by: xhorsevvdi at 10:07 AM | No Comments | Add Comment
Post contains 111 words, total size 1 kb.

How Key Tool Plus Add Key for BMW Motorcycle 2019 GS 850?

Xhorse BMW Motorcycle License is released! So here we are going to show you a test on GS 850 year 2019 with 8A smart key.

 

Let's start it.

1.Generate Remote

Turn on Key Tool Plus,

Select

Remote Program>>BMW Motorcycles>>All remotes

Select "BMW Bike 8A Smart 434.42".

Generate success.

2.Add Key

Remove battery of working key, and connect vehicle to battery stabilizer.

On Key Tool Plus,

Select

Immo programming>>BMW>>Select from system>>BMW motorcycle key learning>>Key function

Turn on ignition to read vehicle info, preprocess is required.

Insert working key into induction coil.

Detect key info.

Select

Coding function>>Backup Coding

Backup coding data.

Go to "Unlock X_SLZ/X_EWS".

Notes before programming.

Unlock success.

Read vehicle info again, it is unlocked.

Read security key.

Network connection is required.

New XM38 BMW Key info.

Go to "Add Key".

Press Yes to learn key via tablet coil, or No to learn via ignition.

Learn new key via coil of VVDI Key Tool Plus.

Make dealer key success.

Done! That's how we add a smart key for BMW GS850 motorcycle using Xhorse XM38 BMW Key.

 

http://blog.xhorsevvdi.com/how-key-tool-plus-add-key-for-bmw-motorcycle-2019-gs-850/

Posted by: xhorsevvdi at 10:06 AM | No Comments | Add Comment
Post contains 190 words, total size 5 kb.

How to Link Xhorse VVDI2/ VVDI PROG/ Key Tool Plus?

New Xhorse MQB48 License requires users to link their devices before authorization, so here we are going to show you how to link your devices.

 

1.VVDI2/ VVDI PROG

1)Generate QR Code

Run "Upgrade Kit".

Identify device. (Select Device>>Find Device)

Click "Binding" to generate a QR code.

2)Scan QR Code

Run Phone App, switch to X-boy screen.

Select

"Account">>"Combine device">>"Combine device">>Scan QR code

Scan QR code we generate in step 1.

2.VVDI Key Tool Plus

Login in by your account, then device will prompt to link device.

http://blog.xhorsevvdi.com/how-to-link-xhorse-vvdi2-vvdi-prog-key-tool-plus/

Posted by: xhorsevvdi at 03:14 AM | No Comments | Add Comment
Post contains 97 words, total size 2 kb.

Possible to Disable VVDI Key Tool Max Pro Boot Sound?

Question:

Is it possible to turn off the boot sound of VVDI Key Tool Max Pro?

 

Answer:

Yes. Hold down Start button for a while, enter system settings, and then disable sounds.

*Only one button in setting to turn off/on all sounds but no single button to disable Boot sound

Hope this could help!

 http://blog.xhorsevvdi.com/possible-to-disable-vvdi-key-tool-max-pro-boot-sound/

Posted by: xhorsevvdi at 03:14 AM | No Comments | Add Comment
Post contains 65 words, total size 1 kb.

How VVDI PROG+VVDI2 Read MQB48 D70F35XX IMMO Data?

Xhorse MQB48 License for VVDIPROG+VVDI2/ VVDI Key Tool Plus is released. With license we could get immo data by removing dashboard and reading data of NEC35XX chip.

Here we will show you a step-by-step guide:

 

Instrument Chip:

D70F35XX

 

Dashboard:

1.Read Dashboard

There are 2 ways of connection,

Method 1 (Lift Pin):

Method 2 (Cut Pin):

Run VVDI PROG software.

Select

5-DASHBOARD>>VW>>MQB-LOCK(D70F35XX)

Read Data.

 

2.Encypt Immo Data

Run VVDI2 software.

Select

Key Learn>>MQB platform instrument immobilizer>>Instrument with MQB48(VDO/JCI-NEC35XXOCK)

Load dash chip data.

Save immo data.

 http://blog.xhorsevvdi.com/how-vvdi-progvvdi2-read-mqb48-d70f35xx-immo-data/ 

Posted by: xhorsevvdi at 03:13 AM | No Comments | Add Comment
Post contains 93 words, total size 4 kb.

VVDI Key Tool Plus BMW FEM Exchange Success

VVDI Key Tool Plus is a professional tool for BMW with many functions beyond key programming covered.

Here is a review of successful test on FEM module exchange.

Path: Homepage>>Immo programming>>BMW>>Select from system>>FEM/BDC Immo system>>Key function

Operation steps:

Open module and read data by guide.

Then renew keys.

After 2 hours of coding new fem, car is ready to go.

http://blog.xhorsevvdi.com/vvdi-key-tool-plus-bmw-fem-exchange-success/

Posted by: xhorsevvdi at 03:13 AM | No Comments | Add Comment
Post contains 69 words, total size 2 kb.

How to Fix VVDI Key Tool Plus Read W639 EIS "Read Failed"

Question:

Try read w639 ezs with adapter but impossible?

Here Xhorsevvdi tech answer:

Connect 12V adapter to XDKP30 Multi-function Adapter.

Connection:

12V Aadapter + Key Tool Plus Tablet>>Multifunction Adapter>>EZS Adapter>>EIS

http://blog.xhorsevvdi.com/how-to-fix-vvdi-key-tool-plus-read-w639-eis-read-failed/

Posted by: xhorsevvdi at 03:12 AM | No Comments | Add Comment
Post contains 43 words, total size 2 kb.

How VVDI Key Tool Max Pro Add Key for Ford Aspire 2017?

VVDI Key Tool Max Pro is a professional tool for multiple models.

In this article we are going to show you how to add keys for Ford Aspire 2017.

Connect device to vehicle and start it.

1.Read PIN Code

Immo programming>>Ford>>China market>>Select by model>>Aspire>>-2019

Read PIN code.

Notes before reading:

1.Need to deactivate alarm if immo alarm is activated.

2.Dash may turn black during reading

Switch on the ignition.

Reading

Switch ignition off, wait 10 seconds, and turn it on again.

Read successfully.

 

2.Add Key

Go to Add key.

Turn on the ignition by new key.

Add key successfully.

New key tests okay.

That's how we add a spare key for Ford Aspire 2017 by Key Tool Max Pro Programmer.

http://blog.xhorsevvdi.com/how-vvdi-key-tool-max-pro-add-key-for-ford-aspire-2017/

Posted by: xhorsevvdi at 09:32 AM | No Comments | Add Comment
Post contains 133 words, total size 3 kb.

VVDI MB Possible to Program Old Mercedes Keyless Go?

Question:

C219 2009 AMG55 VVDI MB fbs3 key programmed but key less can’t see the key works in a slot and remote locks unlocks any advice?

Here is the answer:

VVDI BE Keyless Go Key only supports semi-smart function if original key has two batteries.

 

Solution:

1.Buy aftermarket keys

2.OEM Key with NEC Chip

3.Used OEM key, solder the NEC chip out and renew, then program it

 

http://blog.xhorsevvdi.com/vvdi-mb-possible-to-program-old-mercedes-keyless-go/

Posted by: xhorsevvdi at 09:32 AM | No Comments | Add Comment
Post contains 77 words, total size 2 kb.

Xhorse XT15 Chip Add Key for Mini Cooper R56 EWS3+ Success

Xhorse XT15 Chip is not a super chip but a specific chip for BMW PCF7935. Here is a successful test of adding keys for a Mini Cooper R56.

EWS3+ module.

Read data with AK90+.

Write data to XT15 Transponder with Key Tool Plus Pad.

Generate remote with VVDI Mini.

Keys work in the door, work perfectly.

http://blog.xhorsevvdi.com/xhorse-xt15-chip-add-key-for-mini-cooper-r56-ews3-success/

Posted by: xhorsevvdi at 09:31 AM | No Comments | Add Comment
Post contains 68 words, total size 2 kb.

Key Tool Max Possible to Reset Smart Key Customization Settings?

One customer shared a question about a KeyToolMax:

Jeep Cherokee 2018, I transferred remote start button to panic button. Now I'm not sure what the 'remote start' button number was.

How does Xhorse Remote generate button numbers? Is there a button configuration reset?

Here Xhorsevvdi Tech Answer:

Regenerate and Reprogram it, then all values will be reset.

 

Another customer shares his way:

Generate an extra one, and read values, don't have to program it.

 

http://blog.xhorsevvdi.com/key-tool-max-possible-to-reset-smart-key-customization-settings/

Posted by: xhorsevvdi at 09:31 AM | No Comments | Add Comment
Post contains 85 words, total size 1 kb.

How to Add Spare Key for 2018 MINI R55 BDC by VVDI Prog + VVDI2?

VVDI Prog+VVDI2 or Key Tool Plus Tablet is a great tool for FEM BDC programming. Here we are going to show you how to add a key for 2018 MINI R55 with BDC module.

Tools:

VVDI PROG

VVDI2

FEM/BDC Test Platform

 

Procedures:

Step 1.

Remove BDC module.

Connect BDC module, test platform and VVDI2.

On VVDI2 software,

Go to Key Learn>>FEM/BDC Key Learn

Key info.

Click "Programming FEM/BDC system" to start.

 

Step 2.

Back up coding file.

Open BDC, connect eeprom chip to clip adapter.

On VVDI PROG software

Select 1-EEPROM&FLASH>>ST(CLIP)>>M95256(CLIP)

Read eeprom.

Load eeprom dump file to create service dump by VVDI2.

Write new dump to chip by VVDI PROG.

Write original dump to chip by VVDI PROG.

Restore BDC module, connect it to VVDI2 and test platform.

Now we can add key.

 

Step 3.

Select

Prepare dealer key with ignition switch>>Have a working day

Put working key into key coil of test platform.

Insert new key.

All done！

 

http://blog.xhorsevvdi.com/how-to-add-spare-key-for-2018-mini-r55-bdc-by-vvdi-prog-vvdi2/

Posted by: xhorsevvdi at 09:41 AM | No Comments | Add Comment
Post contains 176 words, total size 5 kb.

VVDI Prog Possible to Virginize BMW E-series Keyless Key?

Question:

Can I use VVDI Prog to virginize BMW E-series KEYLESS key? Which option, third party?

Here Xhorsevvdi answer:

Yes. VVDI Programmer supports renewing BMW E-series third-party key with PCF79XX Adapter.

PINOUT1 (Desoldering)

PINOUT (Soldering)

How to Renew?

1.Load the file "BMW_E_SEIRES_THIRD_PARTY_REMOTE_RENEW.arp"

(file in "Data" folder)

2.Click "Write" to renew chip

3.Do Not support Read, Erase, and Verify

 

http://blog.xhorsevvdi.com/vvdi-prog-possible-to-virginize-bmw-e-series-keyless-key/

Posted by: xhorsevvdi at 09:41 AM | No Comments | Add Comment
Post contains 68 words, total size 2 kb.