One customer asked if VVDI Multi Prog could read R5F104MJA chips. The tool shown error code and incorrect password. And it said it could only read d-flash.

Here is the Answer:

Multi Prog Programmer won't read C-flash data from encrypted R5F104MJA chips.

Notices:

1.If users try to read D-flash from encrypted R5F104MJA chips, data will be erased

2.Code Flash memory starts in buffer from Address 0h, Data Flash memory starts in buffer from Address F1000h (R5F100, R5F101, R5F102, R5F103, R5F104, R5F105, R5F107, R5F109, R5F10A, and R5F10B)

Done! Hope this helps!

Posted by: xhorsevvdi at 09:00 AM | No Comments | Add Comment
Post contains 98 words, total size 2 kb.

One customer wonders about the pinout for airbag R7F701013 renault Traffic.

So here is the Pinout:

Protocol on VVDI Multi Prog should be should be rh850 mcu.

This module pinout have CPT, smok and etc.

On VVDI PROG, read ok, but write random data, fix with another tool.

Done! Hope this helps!

Posted by: xhorsevvdi at 09:00 AM | No Comments | Add Comment
Post contains 61 words, total size 1 kb.

Xhorse VVDI Key Tool Plus is all in one tool, and Xhorse also have specific tool for benz, VVDI MB Tool.

Can you explain to me what's the difference between Key Tool Plus and VVDI MB BGA ?

All the options of VVDI MB BGA are in Key Tool Plus ?
Or just the key option ?

Can we clone EIS with key tool plus ?
Work on ELV like virgin and personalization ?

Reply:

VVDI Key Tool Plus covers the Benz immo programming function.

It has the Benz authorization.

Posted by: xhorsevvdi at 08:59 AM | No Comments | Add Comment
Post contains 194 words, total size 3 kb.

Xhorse XDMLB0 MLB Tool for VW Audi Key Adapter work with VVDI2, VVDI Key Tool Plus. And now Xhorse MLB Remote Key release. This blog is review about Xhorse VVDI MLB Tool and MLB Key.

2021 Audi A5 add key via Xhorse VVDI MLB Tool OK

2019 Audi Q5 with the new xhorse mlb tool and mlb xhorse universal key... success..

2019 AUDI AUDI Q5 all keys lost , order key from dealer with vehicle vin number and key tool plus got the job done, open the new key i got from the dealership read the immo data got the job done

Will keep updating!

Posted by: xhorsevvdi at 08:59 AM | No Comments | Add Comment
Post contains 115 words, total size 3 kb.

Question:

Just getting started with remote programming... I just acquired the Mini FT-OBD Tool I can link it to my phone app but I can't link it to my Key Tool Max Pro so it shows up with my other devices.

Any suggestions?

Some models like shown in picture not included in Key Tool Max Pro Programmer.

Here is the Answer:

Key Tool Max Pro covers all functions of Xhorse FT-OBD Tool.

*The model lists sent is the remote control list, check out the support list on "immo programming"

Done! Hope this helps!

Posted by: xhorsevvdi at 08:58 AM | No Comments | Add Comment
Post contains 104 words, total size 2 kb.

Question:

VVDI Key XZPG00EN problem to clone a VVDI Xhorse key, the original key id 46 is ok, but VVDI MINI impossible to clone the Vvdi key when reading it is not recognized. but it is possible to read it, it is an 8A.

Here is the Answer:

Xhorse VVDI Key XZPG00EN doesn't support cloning.

Generate remote controls of Peugeot, Citroen, and DS and program them.

*Remote controls of these three makes are marked with "PROX".

Done! Hope this helps!

Posted by: xhorsevvdi at 08:57 AM | No Comments | Add Comment
Post contains 87 words, total size 2 kb.

One customer asked if Multi Prog ECU Programmer can repair KM on MQB 5A cluster without VVDI2.

Here is Answer:

To repair KM on MQB48 5A cluster, read/ write data using Multi Prog and repair KM using VVDI2/ Key Tool Plus.

If users modify cluster data by themselves, they don't need VVDI2 or Key Tool Plus.

Done! Hope this helps!

Posted by: xhorsevvdi at 08:56 AM | No Comments | Add Comment
Post contains 72 words, total size 1 kb.

One customer asked which of these options on Key Tool Max Pro to select for 2016 Hiace (Australian market/jap). VVDI Toyota 8A Adapter is already connected to MINI OBD and Key Tool Max Pro.

Here is the Answer:

Try Corolla or Hilux connection diagram.

*Check out if the connection diagrams are the same as the engine compartment

Done! Hope this helps!

Posted by: xhorsevvdi at 08:56 AM | No Comments | Add Comment
Post contains 72 words, total size 1 kb.

MULTI PROG SOP44 & TSOP48 Adapter is designed for R/W SOP44 chips including AM29FXXX, M28FXXX, and TB28FXXX.

Here is a review:

29f200 read write fast and safe with multi prog sop44 adapter.

(Making immo off Sirius32 Renault)

Complete!

Posted by: xhorsevvdi at 08:55 AM | No Comments | Add Comment
Post contains 48 words, total size 2 kb.

Xhorse Watch Smart Key is a watch that can be used as a replacement to your car remote. Use the VVDI Mini Key Tool or Key Tool MAX, Key Tool Plus to program your watch to control your car.

But before purchasing the xhorse watch, how to check whether my car is suitable or not?

please check in Xhorse app>> database:

If it shows NXP-Smart Key, then OK to use Xhorse Watch. Or not.

For example: Toyota Tundra from 2010 with keyless go

We found it like the following pic, need to use XM38 toyota key. Not support via the xhorse watch.

[embed]http://blog.xhorsevvdi.com/how-to-use-xhorse-keylessgo-watch-smart-remote/[/embed]

http://blog.xhorsevvdi.com/how-to-check-whether-xhrose-watch-is-supported-my-car/

Posted by: xhorsevvdi at 08:54 AM | No Comments | Add Comment
Post contains 126 words, total size 2 kb.

Question:

Xhorse Condor XC002 PRO Machine says E0001andsmellsabit?

Here is the Solution:

Open the back cover and tighten the two screws or loosen them if they are overtighted.

Done! Hope this helps

Posted by: xhorsevvdi at 06:49 AM | No Comments | Add Comment
Post contains 42 words, total size 1 kb.

Question:

Xhorse XDNP50 EWS3 Adapter, how to plug in this cable?

Answer:

Solder the cable as below.

Open eeprom clip, break the protective layer, and solder cable to clip.

Read Also:

http://blog.xhorsevvdi.com/xhorse-xdnp50-ews3-adapter-tutorial/

Done! Hope this helps!

Posted by: xhorsevvdi at 06:48 AM | No Comments | Add Comment
Post contains 44 words, total size 2 kb.

How to get key code when all keys are lost with Xhorse Key Cutting Machine?

Generally key code is on the key lock and we have to remove it first.

Here we will show you how.

1)Remove key lock and get key code

2)Select "All key lost" and enter key code

3)Cut key

Done! Hope this helps!

Posted by: xhorsevvdi at 06:48 AM | No Comments | Add Comment
Post contains 70 words, total size 2 kb.

One customer gave feedback that his Xhorse Key Tool Max Pro Programmer was faulty. Once he selected ignition switch coil signal detection, the tool would beep and always shows 4D.

Here is the Solution:

Update Key Tool Max Pro firmware to V1.6.5 and try again.

Make sure nothing else interfere signal.

Done! Hope this helps!

Posted by: xhorsevvdi at 06:47 AM | No Comments | Add Comment
Post contains 67 words, total size 1 kb.

Question:

Anyone has a solution for this Audi ELV of how to bypass it or simulator? VVDI PROG or VVDI2 can do it?

Answer:

1)VVDI PROG Clone Audi ESL

2)Swap the processor by soldering

Done! Hope this helps!

Posted by: xhorsevvdi at 06:47 AM | No Comments | Add Comment
Post contains 49 words, total size 2 kb.

One customer asked if Xhorse VVDI Multi Prog can be used in offline mode.

Here is how to use Multi Prog ECU Programmer in offline mode:

1.Multi prog software version 4.0 or later_: Ensure your software is up-to-date, as earlier versions might not support offline mode.

2.Offline license_: You'll need to obtain an offline license from the manufacturer or an authorized distributor. This license will enable offline mode.

3.Pre-loaded data_: Before going offline, make sure you've pre-loaded the necessary data, such as device configurations and programming files.

In offline mode, you can perform certain operations, like:

- Reading and writing device configurations

- Programming certain devices

- Checking device information

*The functions requiring server connection are not available in offline mode

Posted by: xhorsevvdi at 06:46 AM | No Comments | Add Comment
Post contains 132 words, total size 2 kb.

Question:

VVDI Multi Prog failed to read MC68HC05X32(1D69J) using the Xhorse XDNP41 Adapter, and it said "Chip power configuration Control instrument timeout".

Here is the Answer

Increase VPP voltage by 0.2V.

Path: Power setting>>Voltage>>VPP

Done!

Posted by: xhorsevvdi at 06:46 AM | No Comments | Add Comment
Post contains 43 words, total size 2 kb.

One customer asked how to cut by bitting on house keys using Xhorse Dolphin XP005L Machine.

Here is the Answer:

Dolphin XP005L mainly cuts car keys, so for house keys, Condor MINI PLUS II is a better choice.

But Dolphin XP005L can still cut KW1 house keys, here is how:

1)Under customize key data-share market and search kw1

2)Share market

3)I want to download

4)KW1

Done! Hope this helps!

Posted by: xhorsevvdi at 06:45 AM | No Comments | Add Comment
Post contains 80 words, total size 2 kb.

The latest V7.3.7 VVDI2 Software is released! Get the free download link from Xhorsevvdi.

1. Free Download VVDI2 V7.3.7 Software

V7.3.7 Software

2. V7.3.7 VVDI2 Update Info:

!!!Thisversionrequires firmwareV7.3.5!!!

Posted by: xhorsevvdi at 06:45 AM | No Comments | Add Comment
Post contains 172 words, total size 3 kb.

Question:

Xhorse VVDI PLUS PAD with Xhorse XDFAKLGL Cable,

To the new Mazda cx3 2020 To add a Smartkey will it fit? In this car it is not possible to read the OBD EEPROM, it is closed.

Answer:

Xhorse XDFAKLGL Ford Cable works on Ford AKL programming.

On Key Tool Plus, select "CX3 2017-" menu and perform add key function.

Done! Hope this helps!

Posted by: xhorsevvdi at 06:44 AM | No Comments | Add Comment
Post contains 75 words, total size 2 kb.