VVDI Key Tool Max Pro is a professional tool for multiple models.

In this article we are going to show you how to add keys for Ford Aspire 2017.

Connect device to vehicle and start it.

1.Read PIN Code

Immo programming>>Ford>>China market>>Select by model>>Aspire>>-2019

Read PIN code.

Notes before reading:

1.Need to deactivate alarm if immo alarm is activated.

2.Dash may turn black during reading

Switch on the ignition.

Reading

Switch ignition off, wait 10 seconds, and turn it on again.

Read successfully.

2.Add Key

Go to Add key.

Turn on the ignition by new key.

Add key successfully.

New key tests okay.

That's how we add a spare key for Ford Aspire 2017 by Key Tool Max Pro Programmer.

Posted by: xhorsevvdi at 09:32 AM | No Comments | Add Comment
Post contains 133 words, total size 3 kb.

Question:

C219 2009 AMG55 VVDI MB fbs3 key programmed but key less can’t see the key works in a slot and remote locks unlocks any advice?

Here is the answer:

VVDI BE Keyless Go Key only supports semi-smart function if original key has two batteries.

Solution:

1.Buy aftermarket keys

2.OEM Key with NEC Chip

3.Used OEM key, solder the NEC chip out and renew, then program it

Posted by: xhorsevvdi at 09:32 AM | No Comments | Add Comment
Post contains 77 words, total size 2 kb.

Xhorse XT15 Chip is not a super chip but a specific chip for BMW PCF7935. Here is a successful test of adding keys for a Mini Cooper R56.

EWS3+ module.

Read data with AK90+.

Write data to XT15 Transponder with Key Tool Plus Pad.

Generate remote with VVDI Mini.

Keys work in the door, work perfectly.

Posted by: xhorsevvdi at 09:31 AM | No Comments | Add Comment
Post contains 68 words, total size 2 kb.

One customer shared a question about a KeyToolMax:

Jeep Cherokee 2018, I transferred remote start button to panic button. Now I'm not sure what the 'remote start' button number was.

How does Xhorse Remote generate button numbers? Is there a button configuration reset?

Here Xhorsevvdi Tech Answer:

Regenerate and Reprogram it, then all values will be reset.

Another customer shares his way:

Generate an extra one, and read values, don't have to program it.

Posted by: xhorsevvdi at 09:31 AM | No Comments | Add Comment
Post contains 85 words, total size 1 kb.