Xhorse XZVGM1EN Special PCB Board Exclusively for VW.G MQ48 with XT27B Chip Inside 3 Buttons, support Volkswagen MQB48 folding key .

In xhorse vvdi mini data base posible only generate XS serie remote.
How can I generate this XZ serie for mqb 48 folding?
There is no in database option for XZVGM1EN

Xhorse Engineer reply:

No need to generate, go directly to do immo matching, XZVGM1EN is specific one for mqb48 folding key

http://blog.xhorsevvdi.com/how-to-generate-xhorse-xzvgm1en-vw-mqb-remote-key/

Posted by: xhorsevvdi at 06:37 AM | No Comments | Add Comment
Post contains 83 words, total size 1 kb.

Question:

Does anyone know how to deal with a VVDI Key Tool Plus Tablet remote update problem? I keep getting that error for the last 3 days. Last time I had a similar error on update like that was on the immo Bluetooth tool and ended up being bricked and had to buy a new one. Hope it's not the same case here.

Here is the Answer:

Server issue, the problem now is already solved.

Feedback:

Working now

Done! Hope this helps!

http://blog.xhorsevvdi.com/solved-vvdi-key-tool-plus-remote-databasedata-error/

Posted by: xhorsevvdi at 06:37 AM | No Comments | Add Comment
Post contains 91 words, total size 1 kb.

VVDI MLB Tool can work with VVDI2 or VVDI Key Tool Plus to program VW MLB keys.

Here is a review:

2020 Audi Q8 Add Key Success

Open shell of the original key, solder cables to PCB, and remove capacitors as required by wiring diagrams.

Read original key data.

Make dealer key.

Then learn the new key using VVDI2 Key Programmer in car.

Done!

Posted by: xhorsevvdi at 06:36 AM | No Comments | Add Comment
Post contains 75 words, total size 2 kb.

Other than Bench and Boot mode, VVDI Multi Prog also supports OBD mode by OBD cable in its package.

Here is a review:

Mercedes Benz DTC clear with Multi Prog.

Read MAPS file.

Simply connect Multi Prog Programmer to OBD port.

Done!

Posted by: xhorsevvdi at 06:35 AM | No Comments | Add Comment
Post contains 52 words, total size 2 kb.

Question:

2007 bmw E65 750I

2011 BMW 128I

Writing data into, clone, and erase keys, if VVDI Key Tool Max Pro Programmer will do these jobs for my BMW.

Here is the Answer:

1)For BMW Key Programming

VVDI Key Tool Max Pro supports BMW CAS1/CAS2/CAS3/CAS3+.

Read Also:

http://blog.xhorsevvdi.com/how-key-tool-max-pro-add-new-key-for-bmw-cas3/

2)To erase BMW keys

Key Tool Max Pro supports these BMW keys below:

5WK49145 E Series 868MHz Smartkey

5WK49147 E Series 315MHz Smartkey

5WK49661 F Series 868MHz Continental

5WK49663 F Series 315MHz Continental

5WK49662 F Sories 434 MHz Continental

HUF5661 F Series 868MHz Huf

HUF5662 F Series 315MHz Huf

HUF5663 F Series 434MHz Huf

Huf-F Series 868MHz

Huf-F Series 434MHz

HUF5767 F series 434MHz Hu

Done!

Posted by: xhorsevvdi at 06:35 AM | No Comments | Add Comment
Post contains 124 words, total size 2 kb.

One customer gave feedback that his VVDI Key Tool Plus won't connect to modules of his BMW motorcycle. The Xhorse BMW Motorcycle License was already activated but could not identify modules.

Here is the Solution:

1)Double-check wiring.

2)Press Start button repeatedly so EIS will stay activated.

Done! Hope this helps!

Posted by: xhorsevvdi at 06:34 AM | No Comments | Add Comment
Post contains 60 words, total size 2 kb.

One customer asked why his VVDI2 Full Version still gave an error code 5000. He already linked VVDI2 to VVDI Multi Prog. They are not possible to crack mqb48 cluster for immo data files?

Here is the Answer:

After VVDI2 and Multi Prog is linked to the same account,

Update VVDI2 firmware again.

Read cluster data again using Multi Prog Programmer.

Load new cluster data into VVDI2 to crack immo data.

*Double check the cluster is MQB48 instead of MQB49/5C which is not supported

Read Also:

http://blog.xhorsevvdi.com/how-to-share-xhorse-multi-prog-mqb48-license-with-your-vvdi2-ktp/

Done! Hope this helps!

Posted by: xhorsevvdi at 06:33 AM | No Comments | Add Comment
Post contains 103 words, total size 2 kb.

Question:

VVDI Key Tool Plus Tablet, I've been trying to update for several days now, connecting to different Wi-Fi. But it still doesn't update.

The screen displays,

Error reading device parameters

1.Please check the device whether connect success

2.Server busy, please retry later

Here is the Solution:

Scroll up to turn off Xhorse app, run app again, and update the tool.

Done!

Posted by: xhorsevvdi at 06:33 AM | No Comments | Add Comment
Post contains 72 words, total size 1 kb.

One customer gave feedback that VVDI Multi Prog ECU Tool won't read anything. He tried force update, authorized the tool again, and pressed the RST button but all not working.

Here is the Solution:

Turn off Multi Prog Programmer and after 1 minute turn it on and try update again.

Perform this several times.

Done! Hope this helps!

Posted by: xhorsevvdi at 06:31 AM | No Comments | Add Comment
Post contains 68 words, total size 1 kb.

One customer gave feedback that his VVDI Multi Prog won't update software. After all new updates were downloaded, the software was about to restart, but then everything stayed the same and software notified new updates.

Here is the Answer:

Try to add admin rights to whole Multi Prog folder and EXE file.

Done! Hope this helps!

Posted by: xhorsevvdi at 06:30 AM | No Comments | Add Comment
Post contains 64 words, total size 1 kb.