Xhorse MQB48 Adapter (work with VVDI MLB Tool) is designed to add key for VW MQB48 system. With this adapter, users don't have to remove cluster and can easily extract immo data from MQB48 system.

How to Use VVDI MLB Tool MQB48 Adapter?

1.Replace Chip inside VVDI MLB Tool

Open VVDI MLB Tool

Replace the chip inside VVDI MLB Tool by the new chip in MQB48 Adapter package.

Restore VVDI MLB Tool.

2.Extract IMMO Data

Remove capacitors and solder wires by wiring diagrams.

Connect key pcb to adapter and put it on VVDI MLB Tool.

Key chip side down.

Connect tools to your computer.

Read and save immo data.

3.Learn Key

Open engine compartment.

Connect Key Tool Plus (VVDI2 is also ok) to vehicle.

Select

Immo programming>>Audi>>Select from type>>MQB immo system>>Instrument-NEC35XX(Continental/VDO)

Select "Prepare Dealer Key".

Load immo data we just saved.

Put original key into coil.

Save sync data in case of AKL.

Put new key into coil.

Select "Key Learn".

Key added.

Read Also:

http://blog.xhorsevvdi.com/xhorse-vvdi-mlb-tool-mqb48-wiring-diagram/

Done! Simple and nice!

Posted by: xhorsevvdi at 07:39 AM | No Comments | Add Comment
Post contains 180 words, total size 6 kb.

Question:

VVDI2+ VVDI PROG can read locked BCM2 units? If I need to buy MQB NEC35XX License?

Here is the Answer:

The tools will read BCM2 but locked/encrypted units are not supported.

MQB NEC35XX License is not required.

*If the software shows "Reading...(0%) Read Error", it means that the chip is encrypted and users need to try other tools.

Done! Hope this helps!

Posted by: xhorsevvdi at 07:38 AM | No Comments | Add Comment
Post contains 72 words, total size 1 kb.

Question:

I have an old Condor MINI PLUS Key Cutting Machine serial No.km02 but it doesn’t seem to work Bluetooth it has an Ariel inside but I have spent a lot of time trying to connect but it never does have they got Bluetooth?

Here is the Answer:

Condor MINI PLUS Machine (the SN number begins with 'KM02') doesn't support Bluetooth connection.

Done! Hope this helps!

Posted by: xhorsevvdi at 07:37 AM | No Comments | Add Comment
Post contains 76 words, total size 1 kb.

Question:

Tried to decode vw mqb48 immo data but vvdi2 won't let me do that. it asked me to link tools.

Link Multi Prog Programmer and VVDI2 Full Version to the same Xhorse account, read cluster data again using multi prog, and load data into vvdi2

Here is the Solution:

1)Link multi prog and vvdi2 to the same Xhorse account

2)Read cluster data again using multi prog

3)Load data into vvdi2

4)Get immo data

Done! Hope this helps!

Posted by: xhorsevvdi at 07:37 AM | No Comments | Add Comment
Post contains 89 words, total size 1 kb.

VVDI Multi Prog V52 Database is available! Renesas RH850 R7F701414 and more are added!

Free Download MULTI PROG Software

MULTI PROG Software

*Download software and update database online

V52 Database Update Info (02-18-2025)

+ Add R7F701414 option in [MCU]->[RENESAS]->[RH850]

+ Add ATMEGA103 (TQFP64), ATMEGA128 (TQFP64), ATMEGA1280 (TQFP100), ATMEGA1281 (TQFP64), ATMEGA1284 (PDIP40), ATMEGA1284 (TQFP44), ATMEGA1284P (PDIP40), ATMEGA1284P (TQFP44), ATMEGA16 (PDIP40), ATMEGA16 (TQFP44), ATMEGA162 (TQFP44), ATMEGA163 (PDIP40), ATMEGA163 (TQFP44), ATMEGA164 (PDIP40), ATMEGA164 (TQFP44), ATMEGA164P (PDIP40), ATMEGA164P (TQFP44), ATMEGA165 (TQFP64), ATMEGA165P (TQFP64), ATMEGA168 (MLF2 , ATMEGA168 (PDIP2 , ATMEGA168 (TQFP32), ATMEGA168P (PDIP2 , ATMEGA168P (TQFP32), ATMEGA168PB (PDIP2 , ATMEGA168PB (TQFP32), ATMEGA169 (TQFP64), ATMEGA169P (TQFP64), ATMEGA2560 (TQFP100), ATMEGA2561 (TQFP64), ATMEGA32 (PDIP40), ATMEGA32 (TQFP44), ATMEGA323 (PDIP40), ATMEGA323 (TQFP44), ATMEGA324 (PDIP40), ATMEGA324 (TQFP44), ATMEGA324P (PDIP40), ATMEGA324P (TQFP44), ATMEGA324PB (PDIP40), ATMEGA324PB (TQFP44), ATMEGA325 (TQFP64), ATMEGA3250 (TQFP100), ATMEGA3250P (TQFP100), ATMEGA325P (TQFP64), ATMEGA328 (MLF2 , ATMEGA328 (PDIP2 , ATMEGA328 (TQFP32), ATMEGA328P (PDIP2 , ATMEGA328P (TQFP32), ATMEGA328PB (PDIP2 , ATMEGA328PB (TQFP32), ATMEGA329 (TQFP64), ATMEGA3290 (TQFP100), ATMEGA3290P (TQFP100), ATMEGA329P (TQFP64), ATMEGA48 (MLF2 , ATMEGA48 (PDIP2 , ATMEGA48 (TQFP32), ATMEGA64 (TQFP64), ATMEGA640 (TQFP100), ATMEGA644 (PDIP40), ATMEGA644 (TQFP44), ATMEGA644P (PDIP40), ATMEGA644P (TQFP44), ATMEGA645 (TQFP64), ATMEGA6450 (TQFP100), ATMEGA6450P (TQFP100), ATMEGA645P (TQFP64), ATMEGA649 (TQFP64), ATMEGA6490 (TQFP100), ATMEGA6490P (TQFP100), ATMEGA649P (TQFP64), ATMEGA8 (PDIP2 , ATMEGA8 (TQFP32), ATMEGA88 (MLF2 , ATMEGA88 (PDIP2 , ATMEGA88 (TQFP32), ATMEGA88P (MLF2 , ATMEGA88P (PDIP2 , ATMEGA88P (TQFP32), ATMEGA88PB (PDIP2 , ATMEGA88PB (TQFP32) options in [MCU]->[Atmel]->[ATMEGA]

+ Add M68HC805P18(H44H)[TQFP44], M68HC805P18(K05Y)[TQFP44], MC68HC05P18(1F52W)[TQFP44], MC68HC805P18(0G64R)[TQFP44], MC68HC805P18(G64R)[TQFP44], XC68HC805P18(G04R)[TQFP44] options in [MCU]->[MOTOROLA]->[MC68HC( 05]

+ Add MSC1200Y2, MSC1200Y3, MSC1201Y2, MSC1201Y3, MSC1202Y2, MSC1202Y3, MSC1210Y2, MSC1210Y3, MSC1210Y4, MSC1210Y5, MSC1211Y2, MSC1211Y3, MSC1211Y4, MSC1211Y5, MSC1212Y2, MSC1212Y3, MSC1212Y4, MSC1212Y5, MSC1213Y2, MSC1213Y3, MSC1213Y4, MSC1213Y5, MSC1214Y2, MSC1214Y3, MSC1214Y4, MSC1214Y5 options in [MCU]->[TI]->[MSC12xx]

+ Add LM4F110B2QR(LX4F110B2QR), LM4F111B2QR(LX4F111B2QR), LM4F120B2QR(LX4F120B2QR), LM4F121B2QR(LX4F121B2QR), LM4F110C4QR(LX4F110C4QR), LM4F111C4QR(LX4F111C4QR), LM4F112C4QC(LX4F112C4QC), LM4F120C4QR(LX4F120C4QR), LM4F121C4QR(LX4F121C4QR), LM4F122C4QC(LX4F122C4QC), LM4F130C4QR(LX4F130C4QR), LM4F131C4QR(LX4F131C4QR), LM4F132C4QC(LX4F132C4QC), LM4F110E5QR(LX4F110E5QR), LM4F111E5QR(LX4F111E5QR), LM4F112E5QC(LX4F112E5QC), LM4F120E5QR(LX4F120E5QR), LM4F121E5QR(LX4F121E5QR), LM4F122E5QC(LX4F122E5QC), LM4F130E5QR(LX4F130E5QR), LM4F131E5QR(LX4F131E5QR), LM4F132E5QC(LX4F132E5QC), LM4F210E5QR(LX4F210E5QR), LM4F211E5QR(LX4F211E5QR), LM4F212E5QC(LX4F212E5QC), LM4F230E5QR(LX4F230E5QR), LM4F231E5QR(LX4F231E5QR), LM4F232E5QC(LX4F232E5QC), LM4F110H5QR(LX4F110H5QR), LM4F111H5QR(LX4F111H5QR), LM4F112H5QC(LX4F112H5QC), LM4F112H5QD(LX4F112H5QD), LM4F120H5QR(LX4F120H5QR), LM4F121H5QR(LX4F121H5QR), LM4F122H5QC(LX4F122H5QC), LM4F122H5QD(LX4F122H5QD), LM4F130H5QR(LX4F130H5QR), LM4F131H5QR(LX4F131H5QR), LM4F132H5QC(LX4F132H5QC), LM4F132H5QD(LX4F132H5QD), LM4F210H5QR(LX4F210H5QR), LM4F211H5QR(LX4F211H5QR), LM4F212H5BB(LX4F212H5BB), LM4F212H5QC(LX4F212H5QC), LM4F212H5QD(LX4F212H5QD), LM4F230H5QR(LX4F230H5QR), LM4F231H5QR(LX4F231H5QR), LM4F232H5BB(LX4F232H5BB), LM4F232H5QC(LX4F232H5QC), LM4F232H5QD(LX4F232H5QD) options in [MCU]->[TI]->[LM4Fxxx(LX4Fxxx)]

+ Add LM3S101, LM3S102, LM3S1Z16, LM3S300, LM3S301, LM3S308, LM3S310, LM3S315, LM3S316, LM3S317, LM3S328, LM3S3Z26, LM3S5Y36, LM3S1W16, LM3S3W26, LM3S5T36, LM3S600, LM3S601, LM3S608, LM3S610, LM3S6100, LM3S611, LM3S6110, LM3S612, LM3S613, LM3S615, LM3S617, LM3S618, LM3S628, LM3S1110, LM3S1133, LM3S1138, LM3S1150, LM3S1162, LM3S1165, LM3S1166, LM3S1N11, LM3S1N16, LM3S1P51, LM3S2110, LM3S2139, LM3S2276, LM3S3N26, LM3S5P31, LM3S5P36, LM3S5P3B, LM3S5P51, LM3S5P56, LM3S800, LM3S801, LM3S808, LM3S811, LM3S812, LM3S815, LM3S817, LM3S818, LM3S828, LM3S1332, LM3S1435, LM3S1439, LM3S1512, LM3S1538, LM3S2410, LM3S2412, LM3S2432, LM3S2533, LM3S6420, LM3S6422, LM3S6432, LM3S6537, LM3S8530, LM3S8538, LM3S1601, LM3S1607, LM3S1608, LM3S1620, LM3S1621, LM3S1625, LM3S1626, LM3S1627, LM3S1635, LM3S1636, LM3S1637, LM3S1651, LM3S1751, LM3S1776, LM3S1J11, LM3S1J16, LM3S2601, LM3S2608, LM3S2616, LM3S2620, LM3S2637, LM3S2651, LM3S2671, LM3S2678, LM3S2730, LM3S2739, LM3S2776, LM3S2793, LM3S3634, LM3S3651, LM3S3654, LM3S3739, LM3S3748, LM3S3749, LM3S3J26, LM3S5632, LM3S5651, LM3S5652, LM3S5656, LM3S5662, LM3S5732, LM3S5737, LM3S5739, LM3S5747, LM3S5749, LM3S5752, LM3S5762, LM3S5791, LM3S6610, LM3S6611, LM3S6618, LM3S6633, LM3S6637, LM3S6730, LM3S6753, LM3S8630, LM3S8730, LM3S8733, LM3S8738, LM3S9781, LM3S9790, LM3S9792, LM3S9L71, LM3S9L97, LM3S1811, LM3S1816, LM3S1850, LM3S1911, LM3S1918, LM3S1937, LM3S1958, LM3S1960, LM3S1968, LM3S1969, LM3S1B21, LM3S1R21, LM3S1R26, LM3S2911, LM3S2918, LM3S2919, LM3S2939, LM3S2948, LM3S2950, LM3S2965, LM3S2B93, LM3S3826, LM3S5951, LM3S5956, LM3S5B91, LM3S5R31, LM3S5R36, LM3S6911, LM3S6916, LM3S6918, LM3S6938, LM3S6950, LM3S6952, LM3S6965, LM3S8930, LM3S8933, LM3S8938, LM3S8962, LM3S8970, LM3S8971, LM3S9971, LM3S9997, LM3S9B81, LM3S9B90, LM3S9B92, LM3S9B95, LM3S9B96, LM3S9BN2, LM3S9BN5, LM3S9BN6, LM3S1F11, LM3S1F16, LM3S1G21, LM3S1G58, LM3S2016, LM3S2U93, LM3S5G31, LM3S5G36, LM3S5G51, LM3S5G56, LM3S5U91, LM3S6G11, LM3S6G65, LM3S8G62, LM3S9G97, LM3S9GN5, LM3S9U81, LM3S9U90, LM3S9U92, LM3S9U95, LM3S9U96, LM3S1C21, LM3S1C26, LM3S1C58, LM3S1D21, LM3S1D26, LM3S1H11, LM3S1H16, LM3S2D93, LM3S5C31, LM3S5C36, LM3S5C51, LM3S5C56, LM3S5D51, LM3S5D56, LM3S5D91, LM3S5k31, LM3S5k36, LM3S6C11, LM3S6C65, LM3S8C62, LM3S9C97, LM3S9CN5, LM3S9D81, LM3S9D90, LM3S9D92, LM3S9D95, LM3S9D96, LM3S9DN5, LM3S9DN6 options in [MCU]->[TI]->[LM3Sxxx]

Stay tuned!

Posted by: xhorsevvdi at 07:36 AM | No Comments | Add Comment
Post contains 557 words, total size 8 kb.

One customer asked how to solve error code 5 on his Condor MINI PLUS II Machine. He tried to duplicate SX9 key blade, but the light turned red and the machine stopped working and showed this error.

Here is the Answer:

Loosen the screw here, insert the new blade to the end, tighten the screw, and try again.

Done! Hope this helps!

Posted by: xhorsevvdi at 07:36 AM | No Comments | Add Comment
Post contains 75 words, total size 1 kb.

Question:

Did my first mlb key last week with VVDI MLB Tool and used a new renata 2032 battery, customers calling saying keys dead already, anyone had any issues with these Xhorse MLB Remotes draining battery quickly?

Had to put the key on the reader in center console and start it and it worked fine again. Not sure why it lost sync though.

Possible Solutions:

1.Use GP, Energizer, or Varta battery instead of Renata battery

Feedback:

1)The Renata battery is the problem. in keyless lasts few weeks at most. Try GP or Varta.

2)Same thing Renta battery is the problem they work fine but when you use with mqb key or mlb don't work. I use Energizer

2.Try KYDZ or Original keys

Feedback:

1)Had two VVDI MLB Keys that failed days after programming bought KYDZ ones haven’t had any issues and have done about 10 of them

Done! Hope this helps!

Posted by: xhorsevvdi at 07:35 AM | No Comments | Add Comment
Post contains 160 words, total size 2 kb.

I have a problem with the multi prog. It says Chip data reading failed! Error code: 11040001

It's with the xdnp41 adapter

Xhorse Engineer suggestion:

Before reading, increase VPP by 0.2V in the power settings and try again

It worked when I changed vpp to 3.1

One customer asked how to correct error key info in dump files. He tried to make new keys for BMW CAS3+ using VVDI2 Full Version but it said "Detected error key info in dump file!". How to repair error info?

Here is the Answer:

Simply click "Continue" and Xhorse VVDI2 will repair error key info.

Done! Hope this helps!

Posted by: xhorsevvdi at 07:34 AM | No Comments | Add Comment
Post contains 117 words, total size 2 kb.

I have a problem with the multi prog. It says Chip data reading failed! Error code: 11040001

It's with the xdnp41 adapter

Xhorse Engineer suggestion:

Before reading, increase VPP by 0.2V in the power settings and try again

It worked when I changed vpp to 3.1

Posted by: xhorsevvdi at 07:33 AM | No Comments | Add Comment
Post contains 59 words, total size 1 kb.

As we know, xhorse multi prog comes with free MQB48 NEC35XX license, if you have vvdi2 full, bind vvdi2 and xhorse multi prog with same xhorse account, then your vvdi2 can load the mqb48 data which read via multi prog to add new key. Some customers maybe confused about the combine process, here is the simple instrucstion.

1. Xhorse Account

If you do not use Xhorse tools before, not have Xhorse app or xhorse account, please register xhorse account on Xhorse app.

Here is the xhorse app download QR code

Then register Xhorse Account with your email

Input email address and finish image authentication question.

A security code will be dispatched to your email.
Enter the security code.

Please note that after you register with email, if you do not have phone number account before, no need to continue the phone number, just back to other steps, or it will have error.

2. Bind Xhorse multi prog

Connect multi prog with computer, start multi prog software, in update online option choose combine device

3. How to bind xhorse vvdi2?

Connect vvdi2 with computer, and use xhorse update kit software

choose vvdi2, then find device

click binding

After click bind in xhorse update kit software,it will ask you to Scan QR code like following pic, use your xhorse app to scan is OK

Posted by: xhorsevvdi at 07:33 AM | No Comments | Add Comment
Post contains 234 words, total size 3 kb.

Question:

To cut Land Rover Discovery key blades, I picked NE38 M1 on Key Tool Plus Pad and it told me to use M5 Clamp but Condor MINI PLUS II Machine won't let me to do that, I can't select M5 clamp. How to solve it?

Here is the Answer:

Download key cutting database and try again.

Done! Hope this helps!

http://blog.xhorsevvdi.com/condor-xc-mini-plus-ii-wont-select-m5-clamp-solution/

Posted by: xhorsevvdi at 07:32 AM | No Comments | Add Comment
Post contains 71 words, total size 2 kb.

Question:

VVDI XKB520EN Key, I cannot generate it using Key Tool Max Pro Key Tool. It tells me to use XK Wired Key and I did but it won't read the key.

Here is the Solution:

Select "WireRemote-Gen2" before generating remote control.

Done! Hope this helps!

Posted by: xhorsevvdi at 07:31 AM | No Comments | Add Comment
Post contains 56 words, total size 1 kb.

One customer gave feedback that he bought ID48 tokens for his VVDI Mini Key Tool but not received.

Here is the Answer:

Activate ID48 Cloning Function (Generate 10 New Xhorse Keys) first, or ID48 Tokens and ID48 Token Service won't be added to users' account.

Done!

Posted by: xhorsevvdi at 07:31 AM | No Comments | Add Comment
Post contains 58 words, total size 2 kb.

One customer asked if it is possible to switch Multi Prog CH version to Multi Prog GL Version. The menu disappears after V89 V90 database updates. If he switches language to Chinese and all gets back but he does not understand Chinese.

Here is the Answer:

1.Pay to switch tool's version

Multi Prog Update Service (Switch CH version to GL version)

2.Or try to replace files

Details:

http://blog.xhorsevvdi.com/vvdi-multi-prog-v90-database-empty-menu-solution/

Done! Hope this helps!

http://blog.xhorsevvdi.com/how-to-switch-multi-prog-ch-version-to-global-english-version/

Posted by: xhorsevvdi at 06:34 AM | No Comments | Add Comment
Post contains 84 words, total size 2 kb.

Xhorse Multi Prog ECU Tool will read magnet marelli j10.

Here is a review:

Swift diesel magnet marelli j10 ecm reading ok by xhorse multiprog

Take a look at the process.

PINOUT.

Read Internal FLASH.

Read External EEPROM.

Done! Simple and nice!

http://blog.xhorsevvdi.com/xhorse-multi-prog-read-swift-diesel-magnet-marelli-j10-no-problem/

Posted by: xhorsevvdi at 06:33 AM | No Comments | Add Comment
Post contains 54 words, total size 2 kb.

One customer asked how to use TOY-C1 cable and if this cable is part of Xhorse Toyota 8A Smart Key Adapter and included in the VVDI Key Tool Plus Tablet package.

Here is the Answer:

This TOY-C1 cable is Xhorse Toyota 8A Smart Adapter and users need to purchase this optional accessory.

Users need to make the wire that connects PIN1 PIN2 of TOY-C1 cable and PIN1 PIN2 of smart box themselves.

Done! Hope this helps!

Posted by: xhorsevvdi at 06:32 AM | No Comments | Add Comment
Post contains 86 words, total size 2 kb.

Question:

VVDI MINI Key Tool, Volkswagen, year 2013, ID-48.

The tool shows "There's no result in server for this device."

How to solve this?

Answer:

The immobilizer system is MQB, which won't allow cloning.

Users need to use VVDI2 Key Programmer or Key Tool Plus Pad.

Done! Hope this helps!

Posted by: xhorsevvdi at 06:32 AM | No Comments | Add Comment
Post contains 60 words, total size 1 kb.

Here is a review of Xhorse Multi Prog ECU Programmer:

MAN EDC17cv42

READ ok

WRITE OK

Notices:

Read and clone with 12 volts.

EGR DPF Adblue OFF checksum manual.

Done!

Posted by: xhorsevvdi at 06:31 AM | No Comments | Add Comment
Post contains 39 words, total size 1 kb.

Question:

IownaVVDI PROG Programmeranditrytoreadaudibcm2withrenesasv850chip

Here is the Solution:

Do not extend The Yellow cable (Reset).

Done! Hope this helps!

Posted by: xhorsevvdi at 06:30 AM | No Comments | Add Comment
Post contains 30 words, total size 2 kb.

I've new come up against UDS cluster AKL. I have a 2012 golf cluster and it goes into boot mode ok but when I try to read the IMMO data it comes up with no standard upload data failed…

I have a GODIAG GT110 Test Platform plugged in. The unit is 5K0920973A.

I’ve tested my training unit and I get to the immo data fine.

How to sort it with Xhorse VVDI Key Tool Plus Tablet?

Here is the Solution:

Save abs long coding first, desolder eeprom, read and save it, write service mode on eeprom, solder back, put cluster in car read immo data and save it, write original eeprom via obd, make dealer key, add key, reset cluster.

Done! Hope this helps!

Posted by: xhorsevvdi at 06:28 AM | No Comments | Add Comment
Post contains 138 words, total size 2 kb.