This article will talk about the Xhorse XDNP17 Solder-free Adapters for Porsche IMMO.

This adapter is designed to simplify the process of reading Porsche BCM data. Here we will show you the key programming process with or without this adapter.

1. How to add key for Porsche without adapters?

Tools: VVDI PROG + VVDI2

Model: Porsche Macan 2016

Mask: 1N35H

Connect VVDI PROGto the PCB.

Read and save D-Flash data.

On VVDI2,

Select key position, load the immo file, and put the new key into the coil.

Save the new file.

Install the BCM module back to the car and learn the new key to it.

Go to

Key Learn>>New Porsche Key>>Learn

Load the new file, and usually insert keys in and out to learn.

2. How to add key for Porsche with adapters?

Tools: VVDI Key Tool Plus

Model: Porsche Macan

Mask: 1N35H

Connect Key Tool Plusto the PCB via XDNP17 Porsche Adapter.

Go to

Prog>>Immo>>PORSCHE>>BCM-1N35H-BACKUP>>Adapter>>Read>>D-FLASH

Read and save the data file.

Go to

Immo Programming>>Porsche>>New Porsche key-generate dealer key>>Start programming>>Generated key>>EEPROM(1N35H)

Insert the new key, load immo file, and save the new file.

Install the BCM module back to the car and learn the new key to it.

Go to

Immo Programming>>Porsche>>New Porsche key-key learning>>Start programming>>Learn key

Load the new file, and insert keys to learn as part 1.

Summary

Adapters are designed for simplifying procedures and reducing risks. Soldering has certain requirements, and if anything goes wrong, we have to check every soldered pins and solder always has risks on data loss. Anyway, why not prepare some adapters to make work easier when we have a budget?

Posted by: xhorsevvdi at 09:30 AM | No Comments | Add Comment
Post contains 279 words, total size 5 kb.