This is a quick demo togenerateremote forToyota Camry 2015
Tool option:Xhorse VVDI Key Tool Plus
Blank key Chip:XM-TOY00GL


Theprocedure：
Next is to check original Toyota Remote.
PS: we have the working key.

Path:transponder clone -> read transponder.


It is 8A Toyota Keyless Go learned.

Check frequency.
It isFSK312.1MHZ/314.35 MHZ


Next isremote program - Toyota -All remote - 0020 312.1MHZ/314.35 FSK.

Put XM-Toy00GL PCB into coil antenna hole.
Remote information CB number 0020.

Press [Generate], meanwhile LED on XM PCB flashing.
Calculating required 5 seconds , query after 10 seconds.


Writing data, please wait...
Process time around 1-2 minutes.

Burn success.

Put XM-TOY001 into Toyota smart shell.

Go to program new smart remote.

Firstly, test original remote and new remote.

Then go to:IMMO program -Toyota -select by model.

Camry - 2010 -Smart key system 8A /4D CAN.

Press "Start program".

Select "Read the number of keys".
Please switch ignition on.
The number of registered key:1

Add key.
Please switch ignition on.
The number of registered key:1 , the number of keys that can also registered: 6

Keep touching the ignition switch with sign surface of a registered key, complete the operations within 30 seconds after clicking [OK].

Click [OK] and keep touching the ignition switch with sign surface of a registered key within 30 seconds.

Note: if key sound once, take the key farther away. If key sound twice, it is programmed successfully.

Key registration succeeded!

The number of registered key:2 , the number of keys that can also registered: 5.

Please check if function of remote normal.
Remote function is ok and can start.

Job is done.

http://blog.xhorsevvdi.com/vvdi-key-tool-plus-generate-xm-toy00gl/

Posted by: xhorsevvdi at 02:11 AM | No Comments | Add Comment
Post contains 279 words, total size 4 kb.