Question:

To get the password to a W215 1D69J EIS with VVDI MB,

Try like this, put volts to pin16 and land to others and couldn't get the password.

Here Xhorsevvdi engineers raise the

Solution:

Read the MCU, load EIS file into VVDI MB Tool to get the password. (Here we use VVDI PROG Programmer to read the MCU, and you can also use Mini Prog or Key Tool Plus to do it).

Step 1.

Desolder the chip on EIS and solder it on the MC68HC05X32 Adapter.

Step 2.

Read EIS data by VVDI PROG with the adapter

Step 3.

Load EIS data file into Xhorse VVDI MBto get the password.

Step 4.

Then we can prepare a dealer key by VVDI MB.

Posted by: xhorsevvdi at 10:35 AM | No Comments | Add Comment
Post contains 136 words, total size 3 kb.