Xhorse MQB48 Solder-free Adapter allows us to read VW dashboard without soldering or cutting/ lifting pin.

This article is going to show you how to read VW MQB dashboard D70F3537 using this adapter.

Check it out!

Tools:

VVDI Key Tool Plus

XDNP85 Adapter

Turn on Key Tool Plus Tablet.

Select

Immo programming>>VW>>Select by type>>MQB instrument immo system>>Instrument-MQB48(VDO/JCI-NEC35xx lock)

Ensure network connection.

Select

Programmer reads files>>Read NEC35xx chip>>Adapter method>>D70F3537

Diagram.

Install solder-free adapter.

Possible Errors:

1)If tool prompts the error "Crystal oscillator frequency configuration failed", please reinstall the adapter

2)If tool prompts the error "Chip cracking failed", please tighten adapter or repeat reading data

Connect dashboard to Key Tool Plus.

Read dashboard data.

Select Obtaining immo data.

Load dashboard data file.

Then we can generate dealer key or learn keys.

Done! That's how we read D70F3537 MQB48 dashboard without soldering.

Posted by: xhorsevvdi at 07:21 AM | No Comments | Add Comment
Post contains 149 words, total size 4 kb.