One customer give feedback that his Dolphin XP005's cutter won't rotate or move.

Then we found its belt is broken and it's fixed after replacing. So, here is going to show you how to replace the belt of Xhorse Dolphin Machine.

How to Open Dolphin XP-005?

*The process on Dolphin XP005L is similar

http://blog.xhorsevvdi.com/xhorse-dolphin-xp005-error-56-error-code-6-solution/

Where to Get a Belt Replacement?

1.Within warranty period, contact your seller to send you some for free

2.Buy a replacement yourself, diameters are 50mm and 3mm

Review:

I had this problem. Solved it by buying some 3MM polyurethane Round drive belting for use on various machinery from ebay. Measured the length then heated up a sharp knife to "weld" the belt together. Worked perfectly

Posted by: xhorsevvdi at 09:05 AM | No Comments | Add Comment
Post contains 128 words, total size 3 kb.