Problem:

I have Xhorse VVDI2 and VVDI Super Chip,

When using vvdi2 to write a dealer key from immo data I am getting a "failed to set VVDI super chip ! - Error 00”

Tried several of the new ones they were all the same.

But I successfully cloned an id63 with them.

I have also tried generating some transponders and get the same error.

Here is the Solution:

Update Firmware V7.3.7 again and VVDI2 will work fine.

Done! Hope this helps!

Posted by: xhorsevvdi at 09:08 AM | No Comments | Add Comment
Post contains 95 words, total size 2 kb.