In this article, we are going to show you how to use new Xhorse TPMS Sensor.

To program TPMS sensor, we've got two ways,

1)Copy sensor if we know original sensor ID

2)Learn sensor if we don't know original sensor ID

Here we will show you the second method.

Vehicle:

Ford Transit

Tools:

VVDI Key Tool Max Pro

Xhorse XTPMS Sensor

Guide:

On Key Tool Max Pro,

Select

TPMS>>Ford>>Transit>>2020.01-2022.12(JMC 433MHZ)

Select 'Learn' and check out steps.

Step 1.Generate Sensor

Select

Program>>Automatic Creation

Put XTPMS close to tool.

Step 2.Install new XTPMS

Step 3.Learn XTPMS

Turn on and off ignition to have vehicle in learning mode.

Step 4.Activate sensor

Select

Learn>>Active

Put tool close to sensors to activate them.

Activate left front, right front, right rear, and left rear wheel.

Vehicle will beep once sensor is activated.

Done! That's how to program Xhorse XTPMS Sensor.

Posted by: xhorsevvdi at 09:10 AM | No Comments | Add Comment
Post contains 152 words, total size 4 kb.