How to add key for Mercedes Atego when all key lost. Check this blog.

We'll read the EEPROM file by VVDI PROG, and write it into a T5 transponder by Zed Full.

EEPROM: 93C86

Part 1. Read the EEPROM file

Remove the engine control unit, which has the key data.

Take out the circuit board, and desolder the EEPROM.

Put it into VVDI PROG EEPROM adapter.

On VVDI PROG, select "1-EEPROM&FLASH""ST""M93C86".

Read and save EEPROM file.

Part 2. Transponder Programming

On Zed-Full, go to "Eprom and MCU Anwendungen".

Select "Mercedes""46. Mercedes Truck - Temic ECU".

Load the EEPROM file we just saved.

Check "Key"and put a T5 ceramic chip into the coil.

Select "Programming">> "T5">> "Ok"

Success.

Program a T5 glass chip in the same way.

Test keys.

Done! That's the process of Mercedes Atego 2001 AKL Programming by VVDI Prog and Zed Full.

https://www.xhorsevvdi.com/

Posted by: xhorsevvdi at 09:21 AM | No Comments | Add Comment
Post contains 157 words, total size 5 kb.