Xhorse VVDI2

April 13, 2022

Solved! Dolphin XP007 Both Lights over Left Key Green and On

Question:

Dolphin XP007, why on the left of the key are both lights green and on the left it touching one key?

Solved Dolphin Xp007 Both Lights Over Left Key Green And On 1

Solved Dolphin Xp007 Both Lights Over Left Key Green And On 2

Here Xhorsevvdi technician

Answer:

During Calibration,

Only Left light on, Probe higher than Cutter; Move the micro-adjuster knob to move down the probe.

Only Right light on, Cutter higher than Probe; Move the micro-adjuster knob to move up the probe.

Both lights on, probe and cutter at the same height, calibration finished

Solved Dolphin Xp007 Both Lights Over Left Key Green And On 3

So in picture 1, the calibration is done correctly.

In picture 2, we need to move up the probe:

Loosen position 3 (position 4), and then tighten position 4 (position 3).

Solved Dolphin Xp007 Both Lights Over Left Key Green And On 4

Solved Dolphin Xp007 Both Lights Over Left Key Green And On 5

http://blog.xhorsevvdi.com/solved-dolphin-xp007-both-lights-over-left-key-green-and-on/

Posted by: xhorsevvdi at 10:23 AM | No Comments | Add Comment
Post contains 122 words, total size 4 kb.

15kb generated in CPU 0.0067, elapsed 0.0322 seconds.
35 queries taking 0.0276 seconds, 95 records returned.
Powered by Minx 1.1.6c-pink.