One customer asked why his VVDI2 Full Version still gave an error code 5000. He already linked VVDI2 to VVDI Multi Prog. They are not possible to crack mqb48 cluster for immo data files?

Here is the Answer:

After VVDI2 and Multi Prog is linked to the same account,

Update VVDI2 firmware again.

Read cluster data again using Multi Prog Programmer.

Load new cluster data into VVDI2 to crack immo data.

*Double check the cluster is MQB48 instead of MQB49/5C which is not supported

Read Also:

http://blog.xhorsevvdi.com/how-to-share-xhorse-multi-prog-mqb48-license-with-your-vvdi2-ktp/

Done! Hope this helps!

Posted by: xhorsevvdi at 06:33 AM | No Comments | Add Comment
Post contains 103 words, total size 2 kb.