Question:

Xhorse VVDI PROG read MC68HC908JK1, then program says "Try Frequency failed Chip unconnected(00)".

Here Xhorsevvdi shows the possible

Solution:

1.Check connection by the diagram

2.Heat chip

3.Adjust VCC to 4.5-5.0v and read again

4.If the error remains, it means that the chip is encrypted and VVDI PROG don't support it.

Posted by: xhorsevvdi at 10:25 AM | No Comments | Add Comment
Post contains 59 words, total size 2 kb.