This article is about to bring you a method to read 2nd/3rd/4th BMW EWS module respectively. All No soldering cables or removing MCU.

Contact us to check if your EWS is supported!

Part 1. EWS2

Tools: Ak90+ Key Programmer (Read 1D47J, 2D47J, 0D46J, 2L86D without removing MCU)

Model:BMW 3er E36 1996

MCU:2D47J

Procedure:

Connect MCU to AK90 unit by 10-pin cable.

Connect AK90 unit to PC by USB cable.

On AK90 app,

Press "Connect”and select chip type.

Watch the prompt and click on "Read EWS”.

Part 2. EWS3

Tools: Xhorse XDNP50 EWS3 Adapter

VVDI Key Tool Plus

Procedure:

Use EEPROM clip to clip PIN1.

Connect EWS3 module to XDNP50 EWS3 Adapter.

Combine EWS3 module and EWS3 adapter.

Device path:

Programmer>>IMMO>>BMW>>BMW>>EWS3(Adapter)>>Read>>EEPROM

Part 3. EWS4

Tools:EWS4 Adapter

VVDI Prog

Model:BMW X3 2007

MCU: 2L86D

Procedure:

Put EWS4 module in the adapter and lock it.

Select "4-IMMOBILIZER”"BMW”"EWS4 X(ADAPTER)”.

Press "Read”and "Save”to get data file.

Done! That’s how we read BMW EWS2/EWS3/EWS4 no soldering.

Read also:

Xhorse XDNP50 EWS3 Adapter Step-by-Step Tutorial(No Soldering)?

How to use VVDI Prog and VVDI2Program BMW X3 EWS4.42007?

Posted by: xhorsevvdi at 03:52 AM | No Comments | Add Comment
Post contains 187 words, total size 9 kb.