Xhorse is about to release its BMW G-series BDC2 Add Key solution.

Users need to buy BMW-G BDC2 Adapter and activate BMW license on Xhorse Tools (VVDI Key Tool Plus, VVDI2).

Here we will show you how to add key for BMW G-Series BDC2 with Key Tool Plus and Xhorse BMW G-Series BDC2 Adapter.

Guide:

Connect BDC2 Adapter to BDC2 unit by diagrams.

*Make sure PINS are connected, especially eeprom pin2

Tighten adapter.

Then connect adapter to Xhorse Tool (here we use VVDI Key Tool Plus) and power adapter.

Turn on adapter and check connection by lights.

*If high or low voltage, lights may flash or be dark

On Key Tool Plus,

Select

Immo programming>>More Function>>Test Function

Read vehicle info.

Preprocess BDC2 immo system.

Select 'Step 1.Back up coding'.

Select 'Step 2.Service Mode'.

Select 'Step 3. Read key'.

Select 'Step 4. Programming'.

Select 'Step 5. Restore Coding'.

Go back and select 'Generate dealer key'.

Load key file and make dealer key.

Then just go into vehicle and learn new key.

Done! That's how to add key for BMW G-series BDC2 using Xhorse Key Programmers.

Posted by: xhorsevvdi at 09:19 AM | No Comments | Add Comment
Post contains 198 words, total size 6 kb.