One customer gave feedback that his Multi Prog ECU Programmer was not powered on when reading Infineon MCU.

Here are some Answer:

Install driver and connect MULTI PROG

Path: Help>>Install Driver

*Select "CDC" if computer OS is win7

Done! Hope this helps!

Posted by: xhorsevvdi at 06:44 AM | No Comments | Add Comment
Post contains 52 words, total size 2 kb.

Question:

VVDI2+VVDI PROG, I have polo 2014 with eeprom 24c64 all key lost I read 24c64 and make service mode and when restore eeprom to dashboard and read IMMO data via obd I give that message always some problem with this tool. I m buy ID48 96Bit Copy for VW that I can learn key with all key lost which don't work every new day.

Here is the

Reason:

Select the wrong dashboard option in VVDI2 Programmer software.

Solution

Select "Auto Detect Type" to identify dashboard system and select the correct option for key programming.

Done! Hope this helps!

Posted by: xhorsevvdi at 06:43 AM | No Comments | Add Comment
Post contains 109 words, total size 2 kb.

One customer gave feedback that his Condor XC-MINI Plus II cutter broke before finishing key cutting.

Here are tests required by our tech.

Test main motor, all good.

Here is the Solution:

Open Condor Mini Plus II Machine and check connectors to the driver board.

Re-plug in four marked wires, and be careful about the wire marked by a yellow circle.

Done! Hope this helps!

Posted by: xhorsevvdi at 06:43 AM | No Comments | Add Comment
Post contains 75 words, total size 2 kb.

VVDI MLB Key now can be preordered! New stock will arrive soon!

Here are some tips about this new key,

1)Keys support Audi, Bentley, VW, Porsche, Lamborghini

2)Free data calculation in VVDI MLB/ Key Tool Plus

3)Generate remote on MLB Software in VVDI MLB/ Key Tool Plus

(In Stock) Xhorse XSMA41EN MLB Smart Remote:

https://www.xhorsevvdi.com/wholesale/xhorse-xsma41en-mlb-key.html

Done! Hope this helps!

Posted by: xhorsevvdi at 06:42 AM | No Comments | Add Comment
Post contains 68 words, total size 2 kb.

Questions:

My Multi Prog Programmer just won't read chips. Every MCU I ask to read reports that it doesn't recognize the chip.

Here is the Answer:

Check out wiring pinouts, and the marked wire should be VCC.

Done! Hope this helps!

Posted by: xhorsevvdi at 06:42 AM | No Comments | Add Comment
Post contains 52 words, total size 2 kb.

As the automotive security landscape rapidly evolves, Xhorse is once again setting a new benchmark with a groundbreaking update to its IMMO database, specifically targeting RENAULT and DACIA vehicles. This vital update empowers automotive locksmiths to provide their customers with the most reliable, cutting-edge security solutions available today.

2024.11.11
Groundbreaking Upgrades for RENAULT and DACIA
IMMO Database URTRADE
Key Tool Max Pro V54
Key Tool Plus V126

RENAULT
Smart Key
SCENIC 2016-
MEGANE 2015-
MEGANE SCENIC 2016-
QM6 (SAMSUNG QM6)
SM6 (SAMSUNG SM6)
TALISMAN 2015-
KADJAR 2016-
KOLEOS 2016-
ESPACE 2015-

Flip Key
MEGANE 2002-2008, 2008-2015, 2015-
SCENIC -2016, 2016-
MEGANE SCENIC 2002-2008, 2008-2015, 2016-
MODUS 2004-2012
CLIO 2006-2012
CLIO III
SM5 (SAMSUNG SM5) 2003-2004, 2005-2009
SM6 (SAMSUNG SM6)
SM7 (SAMSUNG SM7) 2003-2004, 2005-
QM6 (SAMSUNG QM6)
DUSTER 2014-2018, 2018-

KANGOO I
KANGOO II 2008-
KANGOO III 2020-
TRAFIC II Ph2
TWINGO I Ph3 2001-2006
SOLENZA
PRIMASTER
ESPACE 2015-
MASTER 2011-2016
KADJAR 2016-
TALISMAN 2015-
KOLEOS 2016-
SAFRANE 2009-
OROCH 2016-
ALASKAN 2016-
DOKKER
LOGAN 2010-2013, 2013-
SANDERO 2013-2020
LODGY
KWID (BRAZIL) 2023-2024
SYMBOL 2013-2018
TRIBBER 2014-2018
LAGUNA 2007-2011

DACIA
Flip Key
DOKKER
DUSTER 2014-2018
LOGAN 2010-2013, 2013-

LODGY
SANDERO 2013-

http://blog.xhorsevvdi.com/xhorse-vvdi-key-tool-plus-max-pro-immo-database-update-for-renault-and-dacia/

Posted by: xhorsevvdi at 06:41 AM | No Comments | Add Comment
Post contains 205 words, total size 3 kb.

GODIAG G-V ECU Cable is released!

It can work with VVDI Multi Prog to read TCU like DQ250, DQ200, MED17.5...

Here we are going to show you how to use this cable.

Tools:

VVDI Multi Prog Programmer

GODIAG G-V Cable

GODIAG ECU Adapter

Guidance:

Run Multi Prog software.

Search for and select "Audi A4 MED17.5".

Connect MED17.5 to Multi Prog by wiring diagrams.

Read EEPROM and turn on GPT adapter and activate 120ohm resistor.

Read FLASH.

Done!

Posted by: xhorsevvdi at 06:40 AM | No Comments | Add Comment
Post contains 88 words, total size 3 kb.

One customer gave feedback that Dolphin XP005 Machine would not hold his keys tightly. He wondered if the keys were not supported or other clamps are required.

Here is the Answer:

If the keys are too short, Dolphin XP005 Key Cutting Machine will barely hold them tightly.

In this case, users can use Clamp M1, or

Try to wrap some tape around the base of the key but be careful during it is being cut.

Done! Hope this helps!

Posted by: xhorsevvdi at 06:40 AM | No Comments | Add Comment
Post contains 89 words, total size 1 kb.

GODIAG GT107+ & GPT Boot& G-V ECU Cable work with Xhorse multi prog for easier connection.

Here is the connection diagram:

1. To read DQ200 with Xhorse MULTI PROG & GT107+ &G-V ECU Cable

2. To read DQ250 with Xhorse MULTI PROG & GT107+ & G-V ECU Cable

3. To read DQ200 with Xhorse MULTI PROG & GT107 & G-V ECU Cable

4. To read DQ250 with Xhorse MULTI PROG & GT107 & G-V ECU Cable

5. To read ME17.8.8 with Xhorse MULTI PROG & GODIAG ECU GPT Boot AD Programming Adapter & G-V ECU Cable

6. To read MED17.5 with Xhorse MULTI PROG & GODIAG ECU GPT Boot AD Programming Adapter & G-V ECU Cable

http://blog.xhorsevvdi.com/xhorse-multi-prog-and-godiag-gt107-gpt-boot-g-v-ecu-cable-connection-diagram/

Posted by: xhorsevvdi at 06:39 AM | No Comments | Add Comment
Post contains 131 words, total size 3 kb.

One customer asked if Key Tool Plus with xndp30 adapter will read edc17c50. And is BMW Bench Read ISN License needed?

Here is the Answer:

Yes and no license is required.

Here are how to connect edc17c50,

Users can use

XDNP30 BOSCH ECU Adapter or

VVDI Prog BOSCH ECU Adapter with XDKP30 Adapter

Done! Hope this helps!

Posted by: xhorsevvdi at 06:38 AM | No Comments | Add Comment
Post contains 68 words, total size 2 kb.

Xhorse XZVGM1EN Special PCB Board Exclusively for VW.G MQ48 with XT27B Chip Inside 3 Buttons, support Volkswagen MQB48 folding key .

In xhorse vvdi mini data base posible only generate XS serie remote.
How can I generate this XZ serie for mqb 48 folding?
There is no in database option for XZVGM1EN

Xhorse Engineer reply:

No need to generate, go directly to do immo matching, XZVGM1EN is specific one for mqb48 folding key

http://blog.xhorsevvdi.com/how-to-generate-xhorse-xzvgm1en-vw-mqb-remote-key/

Posted by: xhorsevvdi at 06:37 AM | No Comments | Add Comment
Post contains 83 words, total size 1 kb.

Question:

Does anyone know how to deal with a VVDI Key Tool Plus Tablet remote update problem? I keep getting that error for the last 3 days. Last time I had a similar error on update like that was on the immo Bluetooth tool and ended up being bricked and had to buy a new one. Hope it's not the same case here.

Here is the Answer:

Server issue, the problem now is already solved.

Feedback:

Working now

Done! Hope this helps!

http://blog.xhorsevvdi.com/solved-vvdi-key-tool-plus-remote-databasedata-error/

Posted by: xhorsevvdi at 06:37 AM | No Comments | Add Comment
Post contains 91 words, total size 1 kb.

VVDI MLB Tool can work with VVDI2 or VVDI Key Tool Plus to program VW MLB keys.

Here is a review:

2020 Audi Q8 Add Key Success

Open shell of the original key, solder cables to PCB, and remove capacitors as required by wiring diagrams.

Read original key data.

Make dealer key.

Then learn the new key using VVDI2 Key Programmer in car.

Done!

Posted by: xhorsevvdi at 06:36 AM | No Comments | Add Comment
Post contains 75 words, total size 2 kb.

Other than Bench and Boot mode, VVDI Multi Prog also supports OBD mode by OBD cable in its package.

Here is a review:

Mercedes Benz DTC clear with Multi Prog.

Read MAPS file.

Simply connect Multi Prog Programmer to OBD port.

Done!

Posted by: xhorsevvdi at 06:35 AM | No Comments | Add Comment
Post contains 52 words, total size 2 kb.

Question:

2007 bmw E65 750I

2011 BMW 128I

Writing data into, clone, and erase keys, if VVDI Key Tool Max Pro Programmer will do these jobs for my BMW.

Here is the Answer:

1)For BMW Key Programming

VVDI Key Tool Max Pro supports BMW CAS1/CAS2/CAS3/CAS3+.

Read Also:

http://blog.xhorsevvdi.com/how-key-tool-max-pro-add-new-key-for-bmw-cas3/

2)To erase BMW keys

Key Tool Max Pro supports these BMW keys below:

5WK49145 E Series 868MHz Smartkey

5WK49147 E Series 315MHz Smartkey

5WK49661 F Series 868MHz Continental

5WK49663 F Series 315MHz Continental

5WK49662 F Sories 434 MHz Continental

HUF5661 F Series 868MHz Huf

HUF5662 F Series 315MHz Huf

HUF5663 F Series 434MHz Huf

Huf-F Series 868MHz

Huf-F Series 434MHz

HUF5767 F series 434MHz Hu

Done!

Posted by: xhorsevvdi at 06:35 AM | No Comments | Add Comment
Post contains 124 words, total size 2 kb.

One customer gave feedback that his VVDI Key Tool Plus won't connect to modules of his BMW motorcycle. The Xhorse BMW Motorcycle License was already activated but could not identify modules.

Here is the Solution:

1)Double-check wiring.

2)Press Start button repeatedly so EIS will stay activated.

Done! Hope this helps!

Posted by: xhorsevvdi at 06:34 AM | No Comments | Add Comment
Post contains 60 words, total size 2 kb.

One customer asked why his VVDI2 Full Version still gave an error code 5000. He already linked VVDI2 to VVDI Multi Prog. They are not possible to crack mqb48 cluster for immo data files?

Here is the Answer:

After VVDI2 and Multi Prog is linked to the same account,

Update VVDI2 firmware again.

Read cluster data again using Multi Prog Programmer.

Load new cluster data into VVDI2 to crack immo data.

*Double check the cluster is MQB48 instead of MQB49/5C which is not supported

Read Also:

http://blog.xhorsevvdi.com/how-to-share-xhorse-multi-prog-mqb48-license-with-your-vvdi2-ktp/

Done! Hope this helps!

Posted by: xhorsevvdi at 06:33 AM | No Comments | Add Comment
Post contains 103 words, total size 2 kb.

Question:

VVDI Key Tool Plus Tablet, I've been trying to update for several days now, connecting to different Wi-Fi. But it still doesn't update.

The screen displays,

Error reading device parameters

1.Please check the device whether connect success

2.Server busy, please retry later

Here is the Solution:

Scroll up to turn off Xhorse app, run app again, and update the tool.

Done!

Posted by: xhorsevvdi at 06:33 AM | No Comments | Add Comment
Post contains 72 words, total size 1 kb.

One customer gave feedback that VVDI Multi Prog ECU Tool won't read anything. He tried force update, authorized the tool again, and pressed the RST button but all not working.

Here is the Solution:

Turn off Multi Prog Programmer and after 1 minute turn it on and try update again.

Perform this several times.

Done! Hope this helps!

Posted by: xhorsevvdi at 06:31 AM | No Comments | Add Comment
Post contains 68 words, total size 1 kb.

One customer gave feedback that his VVDI Multi Prog won't update software. After all new updates were downloaded, the software was about to restart, but then everything stayed the same and software notified new updates.

Here is the Answer:

Try to add admin rights to whole Multi Prog folder and EXE file.

Done! Hope this helps!

Posted by: xhorsevvdi at 06:30 AM | No Comments | Add Comment
Post contains 64 words, total size 1 kb.