For ID48 function, VVDI MINI, VVDI Key Tool Max, Key Tool Max Pro, all need you generate 10 new vvdi remotes, then after 2 hours you will get automatically.

But we receive some customer feedback that

Generated 26remotes, id 48 not activate as yet. Cheers

Solution:

Click more and collect points,then check the license page

http://blog.xhorsevvdi.com/vvdi-key-tool-max-pro-id-48-not-activated-tips/

Posted by: xhorsevvdi at 07:17 AM | No Comments | Add Comment
Post contains 66 words, total size 1 kb.

Key Tool Max pro covers the function of key tool max, mini obd tool, ft-obd toyota. And it is good tool for diy user of key programming.

And we received feedback that

I connected the Key Tool Max Pro via OBD cable provided selected immo Programming selected Suzuki Wagon 2008- 2017 after that I get a code not correct message code is provided by the Key Tool Max Pro

Engineer reply:

The pass not right,you need find third party to get the pass.

The algorithm for this car's password is different.Then the one is not right, You need to check the password yourself.

Posted by: xhorsevvdi at 07:17 AM | No Comments | Add Comment
Post contains 114 words, total size 1 kb.

One customer gave feedback that he cannot connect VVDI Key Tool Lite to his phone. And Xhorse app said "Device connect failed" and asks if the phone supports OTG function.

Here is the Solution:

1)Check OTG function in phone settings.

2)If OTG is supported, go to

Settings>>Other Network and Connection

Turn on OTG function

*OTG is automatically turned on in some phones, but also not supported in some others.

Posted by: xhorsevvdi at 07:16 AM | No Comments | Add Comment
Post contains 81 words, total size 2 kb.

Question:

How to Fix the problems that Xhorse Key Tool Max Pro does not copy the new key car file? I used XM38 Smart Key.

Here Xhorsevvdi tech shares the

Solution:

1)Generate the remote control for 8A-A8

2)Copy (Load) EEPROM file

3)Prepare dealer key

4)Add new key

Posted by: xhorsevvdi at 07:16 AM | No Comments | Add Comment
Post contains 59 words, total size 2 kb.

One Xhorse VVDI2 user gave feedback that he upgraded everything and still get this message.

Here is the Solution:

Update Software and Firmware to the latest version and try again.

Software: Download V7.3.5 VVDI2

Firmware: Update to V7.3.5 by Xhorse Upgrade Kit

Posted by: xhorsevvdi at 07:15 AM | No Comments | Add Comment
Post contains 54 words, total size 2 kb.

M4 Clamp shim could help fix blades on Xhorse Dolphin Machine, but what replacements can we use if we lose it?

Here is the Answer:

The shim is around 1.12mm thick, use something of the same or close thickness.

Battery packet cardboard, credit card, utility knife blade, or match book cover may work.

Posted by: xhorsevvdi at 07:15 AM | No Comments | Add Comment
Post contains 63 words, total size 1 kb.

Xhorse V108 IMMO Database adds Fiat smart key and Jeep Renegade MQB48 key!

Database Available in:

Key Tool Max Pro

Key Tool Plus

Update Info:

1)Fiat Viaggio, Ottimo 3 Button Smart Key

Generate Dealer Key

Add Key and All Key Lost

2)Jeep Renegade Flip Key MQB48

Add Key and All Key Lost

Posted by: xhorsevvdi at 07:14 AM | No Comments | Add Comment
Post contains 62 words, total size 1 kb.

New Xhorse XDNPRBGL MQB-RH850/V850 Adapter is released!

Here have collected FAQs about the new item.

Check them out!

FAQs:

1.Only Key Tool Plus? VVDI PROG or Mini Prog?

Now RH850 Cable only works with Key Tool Plus.

Please wait for VVDI PROG updates later.

2.Support list? Support read encrypted data from this dash? Crafter 2019 MCU r7f701402？

Yes it requires MQB License and new RH850 Adapter.

Supported Types:

D70F3426

D70F3524

D70F3525

D70F3526

D70F3529

D70F3532

D70F3537

R7F701401

R7F701402

R7F701407

3.Still need sync file when akl?

Yes, synchronization file is still needed when all key lost.

Posted by: xhorsevvdi at 07:14 AM | No Comments | Add Comment
Post contains 100 words, total size 2 kb.

Question:

Xhorse Condor Mini Plus II Machine,No error it’s just make weird noise.

The it starts shaking.

Only the cutting side.

Feel like I have to tie it up from inside.

Here Xhorsevvdi tech shares the

Solution 1:

Tighten screws for fixing main axis.

1)Open Condor II Machine

For detailed steps:

remove the screw in the red cricle

Unplug the screen cable first
The cover can be removed by removing the corresponding screws on the outside.

Remove two or three screws on each side

2)After step 1, then tighten these screws

Usually the first suggestion will solve the problem.

But if this still not working, it is the spindle motor proble, you need contact your seller to get new part

Please do like the condor mini plus 2 repair guide to replace spindle part

https://www.xhorsevvdi.com/upload/pro/23111617001916069037.pdf

2.5.1 Replace the spindle motor and the cutter shaft
When the motor makes abnormal noise, it needs to be replaced. Refer the chapter 2.5.4 to remove the Z-axis screw shaft motor first, and remove the screws in the red frame below.

Then remove the spindle shaft to replace, insert the port according to the wire harness label

Posted by: xhorsevvdi at 07:13 AM | No Comments | Add Comment
Post contains 204 words, total size 6 kb.

Question:

Xhorse Key Tool Max Pro keeps showing "Request failed, try again later" during id48 calculation.

Here is the Solution:

1)Test network

Switch to X-boy page.

Select

Support Centre>>Network Detection

2)Try hotspot according to results

Posted by: xhorsevvdi at 07:13 AM | No Comments | Add Comment
Post contains 48 words, total size 2 kb.

Question:

Bought Xhorse MQB Cluster License. Cluster is 3g0920751a and it matches with the VVDI PROG Programmer instruction for d70f3532-a, I have cut tracks but purple still connected to reference points indicated, FVDD still connected to ref1 and ref2 even after cutting tracks.

Here Xhorsevvdi tech answers

Reason:

"Try Frequency Fail (00)" is caused by wrong connection or pin cutting.

Solution:

Carefully follow the two orange tracks: one is I-shaped; the other is oval.

Posted by: xhorsevvdi at 07:12 AM | No Comments | Add Comment
Post contains 86 words, total size 2 kb.

Question:

Condor Mini Plus II, The machine was working fine for a few weeks after placing mother board. It has broken probe and cutter because it brakes when machine doesn’t wanna go up. Maybe Z axis motor idk.

Motor Measurement Results:

Here is the

Reason:

Wrong connections of Y-axis and Z-axis cables.

Solution:

Reverse Y-axis and Z-axis cable.

Posted by: xhorsevvdi at 07:12 AM | No Comments | Add Comment
Post contains 70 words, total size 3 kb.

One customer gave feedback that he can't update Xhorse Dolphin XP005 firmware since PC suite won't identify the machine. And software shows "Select device not found".

Here is the Answer:

Install driver and update again

(Path: Upgrade kti>>Driver>>2016-02-02driver)

Posted by: xhorsevvdi at 07:11 AM | No Comments | Add Comment
Post contains 50 words, total size 2 kb.

One customer gave feedback that his Condor Mini Plus II Machine gave error code 4, 5, 6. He got it down to 0.12 on the z axis but I haven't got it to zero yet.

Here is the Solution:

1.Do motor test of Z-axis, and send a video to tech for analysis

(Path: Device information>> Motor Measurement>>Z-Axis)

2.or open Condor II Machine, and check if Z-axis sensor is broken

Posted by: xhorsevvdi at 07:10 AM | No Comments | Add Comment
Post contains 81 words, total size 2 kb.

One customer gave feedback that his Key Tool Max Pro won't update firmware. He tried with different network options and 5G phone hotspot but all failed and it gave "error=20_58". Another Key Tool Max updated firmware without problems.

Here Xhorsevvdi tech answers:

1)Clear cache or Restore factory settings

2)Update firmware again

3)If it still fails, send it back to factory

Posted by: xhorsevvdi at 07:34 AM | No Comments | Add Comment
Post contains 71 words, total size 1 kb.

One customer asked what SWFL lost means at the bottom of the screen. SWFL number is showing when Xhorse VVDI2 read key ok.

Here is the answer:

The "SWFL lost" prompt is normal after BDC is unlocked.

Do not worry about it.

If BDC has no communication due to improper voltage or other reasons.

Restore Flash with ESYS or ISTA.

Hope this could help!

Posted by: xhorsevvdi at 07:34 AM | No Comments | Add Comment
Post contains 76 words, total size 1 kb.

Question:

What device can bind a smart key to a Toyota Land Cruiser 300 with a password that comes from an immobilizer dump? FT-OBD Tool will work, and how?

Here is the Answer:

Xhorse FT-OBD Tool will work it.

Direct read EEPROM or use Toyota Adapter, and then add keys.

Any questions, welcome to contact us!

Posted by: xhorsevvdi at 07:33 AM | No Comments | Add Comment
Post contains 68 words, total size 2 kb.

One customer gave feedback that he cannot remove M5 Clamp on his Dolphin XP005L Machine. However he rotates the handle, the clamp won't move at all.

Here is the Solution:

1)Rotate this handle to remove clamp

2)The issue is not about removal but clamp not being able to fix a key blade

So tighten clamp, and slightly hit the other side of the handle to restore clamp

Posted by: xhorsevvdi at 07:33 AM | No Comments | Add Comment
Post contains 77 words, total size 2 kb.

Here is a review about Xhorse XP005L with Key Reader:

Xhorse xp005l BMW E60 Key Cutting 2004 No Problem.

Take a simple look at what it was done!

Decode original key using Xhorse Key Reader.

Insert key blade and start Dolphin XP005L.

The original and new key.

Done! Easy and Pro!

Posted by: xhorsevvdi at 07:32 AM | No Comments | Add Comment
Post contains 61 words, total size 2 kb.

Question:

Add Xhorse BMW Motorcycle License, but my VVDI2 Key Programmer had no communication with the model.

Here is the

Reason:

No connection with motorcycle,

Solution:

Activate the lock first by diagrams.

Hope this could help!

Posted by: xhorsevvdi at 07:31 AM | No Comments | Add Comment
Post contains 47 words, total size 2 kb.